Phoenix Contact 2891411 Network Switch

SKU: 2891411
Regular price $635.36
In stock (98 units)
Condition
Free standard shipping on orders of $500 and above
100% secure payments
Industry leading quality

Phoenix Contact · Network Switch

2891411 is a Phoenix Contact circuit breaker with Tripping characteristic 7 mm; Breaking capacity Icu/Ics Ethernet in RJ45 twisted pair; Supply voltage 24 V DC (IEC 61131-2). It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.

  • Tripping characteristic7 mm
  • Breaking capacity Icu/IcsEthernet in RJ45 twisted pair
  • Supply voltage24 V DC (IEC 61131-2)
  • Enclosure ratingIP20 (IEC 60529)

Specifications

Electrical
Breaking capacity Icu/Ics Ethernet in RJ45 twisted pair
Tripping characteristic 7 mm
Supply voltage 24 V DC (IEC 61131-2)
Rated speed 10/100 Mbps
Mechanical
Weight 504.5 g
Mounting 35 mm DIN rail (IEC 60715)
Terminal wire size 0.2 mm² ... 2.5 mm²
Enclosure rating IP20 (IEC 60529)
Environment and compliance
Operating temperature 0...+55 °C (IEC 60068-2-1)
Certifications CE, UL, cULus
Humidity 5 % ... 95 % (non-condensing)

Values follow the Phoenix Contact Network Switch specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.

Model comparison in the same family

Phoenix Contact Network Switch variants
Catalog number Breaking capacity Icu/Ics Tripping characteristic
2891411 (this page) Ethernet in RJ45 twisted pair 7 mm
2891444 Ethernet in RJ45 twisted pair 7 mm
2891453 Ethernet in RJ45 twisted pair 7 mm
2891466 Copper 7 mm

Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.

Where it sits in the control system

The 2891411 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — 24 V DC (IEC 61131-2) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.

Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.

Selection notes for Phoenix Contact 2891411

Phoenix Contact 2891411 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2891411; record the nameplate data of the unit being replaced before selecting an equivalent.

  • Tripping characteristic: 7 mm — Confirm the revision of the installed unit before a like-for-like replacement.
  • Rated speed: 10/100 Mbps — Use it as the reference when cross-checking a current-production equivalent.
  • Supply voltage: 24 V DC (IEC 61131-2) — Verify it in the project documentation before confirming the order.
  • Weight: 504.5 g — Check this value against the nameplate of the installed unit before ordering.

Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.

Common questions about 2891411

Q.Which value is published under tripping characteristic for catalog number 2891411?

For 2891411, tripping characteristic is given as 7 mm. Compare it with the nameplate of the installed unit before ordering.

Q.Before ordering 2891411, which breaking capacity Icu/Ics entry should be checked?

The breaking capacity Icu/Ics entry quoted above is Ethernet in RJ45 twisted pair. Confirm this figure against the unit currently in the panel.

Q.Where can I find the supply voltage data for 2891411?

It is listed in the specification table for Phoenix Contact 2891411 as 24 V DC (IEC 61131-2). Use the value as the reference when sourcing a current-production equivalent.

Q.What should I include in an enquiry for 2891411?

Send the full catalog number 2891411, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 2891411.

Q.How do I confirm compatibility of 2891411 before ordering?

Match the catalog number 2891411 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.

Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.

Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. Express shipping is a fixed USD 50.00 for eligible destinations in the United States and Canada.

Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.

Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date the order is placed (order date), against defects in materials and workmanship under normal use.

This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.

★★★★★

No reviews yet. Be the first to review this product!