Phoenix Contact · Network Switch
2891031 is a Phoenix Contact circuit breaker with Tripping characteristic 7 mm; Breaking capacity Icu/Ics Ethernet in RJ45 twisted pair; Supply voltage 24 V DC (IEC 61131-2). It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Tripping characteristic7 mm
-
Breaking capacity Icu/IcsEthernet in RJ45 twisted pair
-
Supply voltage24 V DC (IEC 61131-2)
-
Enclosure ratingIP20 (IEC 60529)
Specifications
| Electrical |
| Breaking capacity Icu/Ics |
Ethernet in RJ45 twisted pair |
| Tripping characteristic |
7 mm |
| Supply voltage |
24 V DC (IEC 61131-2) |
| Rated speed |
10/100 Mbps |
| Mechanical |
| Weight |
837 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Terminal wire size |
0.2 mm² ... 2.5 mm² |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
| Humidity |
5 % ... 95 % (non-condensing) |
Values follow the Phoenix Contact Network Switch specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Network Switch variants |
| Catalog number |
Tripping characteristic |
Breaking capacity Icu/Ics |
|
2891031 (this page) |
7 mm |
Ethernet in RJ45 twisted pair |
| 2891035 |
7 mm |
Ethernet in RJ45 twisted pair |
| 2891036 |
7 mm |
Ethernet in RJ45 twisted pair |
| 2891037 |
7 mm |
Ethernet in RJ45 twisted pair |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 2891031 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — 24 V DC (IEC 61131-2) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 2891031
Phoenix Contact 2891031 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2891031; record the nameplate data of the unit being replaced before selecting an equivalent.
- Terminal wire size: 0.2 mm² ... 2.5 mm² — Match it to the existing panel and upstream protection.
- Weight: 837 g — Record it with the other nameplate data when sourcing a replacement.
- Humidity: 5 % ... 95 % (non-condensing) — Confirm the revision of the installed unit before a like-for-like replacement.
- Mounting: 35 mm DIN rail (IEC 60715) — Use it as the reference when cross-checking a current-production equivalent.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about 2891031
Q.Where can I find the tripping characteristic data for 2891031?
It is listed in the specification table for Phoenix Contact 2891031 as 7 mm. Check the revision of the installed unit if the catalog number has been superseded.
Q.For 2891031, what does the specification table state about terminal wire size?
The specification table lists terminal wire size = 0.2 mm² ... 2.5 mm² for Phoenix Contact 2891031. Compare it with the nameplate of the installed unit before ordering.
Q.Which value is published under enclosure rating for catalog number 2891031?
For 2891031, enclosure rating is given as IP20 (IEC 60529). Confirm this figure against the unit currently in the panel.
Q.Can the 2891031 replace the unit currently installed in my panel?
Compare catalog number 2891031 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.How do I confirm compatibility of 2891031 before ordering?
Match the catalog number 2891031 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.