Phoenix Contact · Network Switch
2891025 is a Phoenix Contact circuit breaker with Tripping characteristic 7 mm; Breaking capacity Icu/Ics Ethernet in RJ45 twisted pair; Supply voltage 24 V DC (IEC 61131-2). It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Tripping characteristic7 mm
-
Breaking capacity Icu/IcsEthernet in RJ45 twisted pair
-
Supply voltage24 V DC (IEC 61131-2)
-
Enclosure ratingIP20 (IEC 60529)
Specifications
| Electrical |
| Breaking capacity Icu/Ics |
Ethernet in RJ45 twisted pair |
| Tripping characteristic |
7 mm |
| Supply voltage |
24 V DC (IEC 61131-2) |
| Rated speed |
10/100 Mbps |
| Mechanical |
| Weight |
648 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Terminal wire size |
0.2 mm² ... 2.5 mm² |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
| Humidity |
5 % ... 95 % (non-condensing) |
Values follow the Phoenix Contact Network Switch specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Network Switch variants |
| Catalog number |
Tripping characteristic |
Breaking capacity Icu/Ics |
|
2891025 (this page) |
7 mm |
Ethernet in RJ45 twisted pair |
| 2891020 |
7 mm |
Ethernet in RJ45 twisted pair |
| 2891021 |
7 mm |
Ethernet in RJ45 twisted pair |
| 2891027 |
— |
— |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 2891025 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — 24 V DC (IEC 61131-2) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 2891025
Phoenix Contact 2891025 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2891025; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Certifications: CE, UL, cULus — Confirm the revision of the installed unit before a like-for-like replacement.
- Enclosure rating: IP20 (IEC 60529) — Use it as the reference when cross-checking a current-production equivalent.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Verify it in the project documentation before confirming the order.
- Terminal wire size: 0.2 mm² ... 2.5 mm² — Check this value against the nameplate of the installed unit before ordering.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about 2891025
Q.Where can I find the humidity data for 2891025?
It is listed in the specification table for Phoenix Contact 2891025 as 5 % ... 95 % (non-condensing). Confirm this figure against the unit currently in the panel.
Q.For 2891025, what does the specification table state about certifications?
The specification table lists certifications = CE, UL, cULus for Phoenix Contact 2891025. Use the value as the reference when sourcing a current-production equivalent.
Q.Which value is published under rated speed for catalog number 2891025?
For 2891025, rated speed is given as 10/100 Mbps. Check the revision of the installed unit if the catalog number has been superseded.
Q.Can the 2891025 replace the unit currently installed in my panel?
Compare catalog number 2891025 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.What should I include in an enquiry for 2891025?
Send the full catalog number 2891025, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 2891025.