Phoenix Contact · Communication Module
2710314 is a Phoenix Contact industrial component with Supply voltage 24 V DC (IEC 61131-2); Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltage24 V DC (IEC 61131-2)
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
Mounting35 mm DIN rail (IEC 60715)
Specifications
| Electrical |
| Tripping characteristic |
8 mm |
| Supply voltage |
24 V DC (IEC 61131-2) |
| Power consumption |
1 W (With 24 mA/12 V) |
| Mechanical |
| Weight |
90.2 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Terminal wire size |
0.14 mm² ... 1.5 mm² |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Communication Module specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Communication Module variants |
| Catalog number |
Mounting |
|
2710314 (this page) |
35 mm DIN rail (IEC 60715) |
| 2716949 |
DIN rail / panel |
| 2718701 |
35 mm DIN rail (IEC 60715) |
| 2719470 |
DIN rail / panel |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 2710314 is the device-level element in a Phoenix Contact industrial component installation. It receives the field signals and control supply listed above — 24 V DC (IEC 61131-2) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 2710314
Phoenix Contact 2710314 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2710314; confirm the installed unit's part number and revision so the replacement matches both electrically and mechanically.
- Supply voltage: 24 V DC (IEC 61131-2) — Check this value against the nameplate of the installed unit before ordering.
- Tripping characteristic: 8 mm — Match it to the existing panel and upstream protection.
- Terminal wire size: 0.14 mm² ... 1.5 mm² — Record it with the other nameplate data when sourcing a replacement.
- Power consumption: 1 W (With 24 mA/12 V) — Confirm the revision of the installed unit before a like-for-like replacement.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about 2710314
Q.Where can I find the terminal wire size data for 2710314?
It is listed in the specification table for Phoenix Contact 2710314 as 0.14 mm² ... 1.5 mm². Confirm this figure against the unit currently in the panel.
Q.For 2710314, what does the specification table state about certifications?
The specification table lists certifications = CE, UL, cULus for Phoenix Contact 2710314. Use the value as the reference when sourcing a current-production equivalent.
Q.Which value is published under mounting for catalog number 2710314?
For 2710314, mounting is given as 35 mm DIN rail (IEC 60715). Check the revision of the installed unit if the catalog number has been superseded.
Q.What should I include in an enquiry for 2710314?
Send the full catalog number 2710314, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 2710314.
Q.How do I confirm compatibility of 2710314 before ordering?
Match the catalog number 2710314 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.