Phoenix Contact 2702887 Gateway

SKU: 2702887
Regular price $190.00
In stock (68 units)
Condition
Free standard shipping on orders of $500 and above
100% secure payments
Industry leading quality

Phoenix Contact · Gateway

2702887 is a Phoenix Contact industrial component with Supply voltage 24 V DC (IEC 61131-2); Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.

  • Supply voltage24 V DC (IEC 61131-2)
  • Enclosure ratingIP20 (IEC 60529)
  • Operating temperature0...+55 °C (IEC 60068-2-1)
  • Mounting35 mm DIN rail (IEC 60715)

Specifications

Electrical
Supply voltage 24 V DC (IEC 61131-2)
Frequency 700 MHz (LTE B13)
Rated speed 10/100 Mbps, auto negotiation
I/O and communication
Protocols ESP tunnel
Mechanical
Weight 347 g
Mounting 35 mm DIN rail (IEC 60715)
Terminal type 0.14 mm² ... 1.5 mm²
Terminal wire size 26 ... 16
Enclosure rating IP20 (IEC 60529)
Environment and compliance
Operating temperature 0...+55 °C (IEC 60068-2-1)
Certifications CE, UL, cULus
Humidity 10 % ... 95 % (non-condensing)

Values follow the Phoenix Contact Gateway specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.

Model comparison in the same family

Phoenix Contact Gateway variants
Catalog number Mounting
2702887 (this page) 35 mm DIN rail (IEC 60715)
2702885 35 mm DIN rail (IEC 60715)
2702139 35 mm DIN rail (IEC 60715)
2702235 DIN rail / panel

Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.

Where it sits in the control system

The 2702887 is the device-level element in a Phoenix Contact industrial component installation. It receives the field signals and control supply listed above — 24 V DC (IEC 61131-2) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.

Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.

Selection notes for Phoenix Contact 2702887

Phoenix Contact 2702887 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2702887; confirm the installed unit's part number and revision so the replacement matches both electrically and mechanically.

  • Terminal wire size: 26 ... 16 — Check this value against the nameplate of the installed unit before ordering.
  • Enclosure rating: IP20 (IEC 60529) — Match it to the existing panel and upstream protection.
  • Rated speed: 10/100 Mbps, auto negotiation — Record it with the other nameplate data when sourcing a replacement.
  • Operating temperature: 0...+55 °C (IEC 60068-2-1) — Confirm the revision of the installed unit before a like-for-like replacement.

Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.

Common questions about 2702887

Q.For 2702887, what does the specification table state about weight?

The specification table lists weight = 347 g for Phoenix Contact 2702887. Use the value as the reference when sourcing a current-production equivalent.

Q.Which value is published under enclosure rating for catalog number 2702887?

For 2702887, enclosure rating is given as IP20 (IEC 60529). Check the revision of the installed unit if the catalog number has been superseded.

Q.Before ordering 2702887, which humidity entry should be checked?

The humidity entry quoted above is 10 % ... 95 % (non-condensing). Compare it with the nameplate of the installed unit before ordering.

Q.What should I include in an enquiry for 2702887?

Send the full catalog number 2702887, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 2702887.

Q.Can the 2702887 replace the unit currently installed in my panel?

Compare catalog number 2702887 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.

Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.

Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. Express shipping is a fixed USD 50.00 for eligible destinations in the United States and Canada.

Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.

Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date the order is placed (order date), against defects in materials and workmanship under normal use.

This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.

★★★★★

No reviews yet. Be the first to review this product!