Phoenix Contact · Network Switch
2700271 is a Phoenix Contact industrial component with Supply voltage 24 V DC (IEC 61131-2); Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltage24 V DC (IEC 61131-2)
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
Specifications
| Electrical |
| Supply voltage |
24 V DC (IEC 61131-2) |
| Mechanical |
| Weight |
3,020.000 g |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Network Switch specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Network Switch variants |
| Catalog number |
Mounting |
|
2700271 (this page) |
DIN rail / panel |
| 2700200 |
DIN rail / panel |
| 2700996 |
35 mm DIN rail (IEC 60715) |
| 2701418 |
35 mm DIN rail (IEC 60715) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 2700271 is the device-level element in a Phoenix Contact industrial component installation. It receives the field signals and control supply listed above — 24 V DC (IEC 61131-2) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 2700271
Phoenix Contact 2700271 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2700271; confirm the installed unit's part number and revision so the replacement matches both electrically and mechanically.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Verify it in the project documentation before confirming the order.
- Supply voltage: 24 V DC (IEC 61131-2) — Check this value against the nameplate of the installed unit before ordering.
- Enclosure rating: IP20 (IEC 60529) — Match it to the existing panel and upstream protection.
- Weight: 3,020.000 g — Record it with the other nameplate data when sourcing a replacement.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about 2700271
Q.Where can I find the certifications data for 2700271?
It is listed in the specification table for Phoenix Contact 2700271 as CE, UL, cULus. Check the revision of the installed unit if the catalog number has been superseded.
Q.For 2700271, what does the specification table state about enclosure rating?
The specification table lists enclosure rating = IP20 (IEC 60529) for Phoenix Contact 2700271. Compare it with the nameplate of the installed unit before ordering.
Q.Which value is published under mounting for catalog number 2700271?
For 2700271, mounting is given as DIN rail / panel. Confirm this figure against the unit currently in the panel.
Q.Can the 2700271 replace the unit currently installed in my panel?
Compare catalog number 2700271 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.How do I confirm compatibility of 2700271 before ordering?
Match the catalog number 2700271 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.