Phoenix Contact · Terminal Block
2322087 is a Phoenix Contact terminal block with Rated current Ie up to 41 A (IEC 60947-7-1); Rated operational voltage 800 V (IEC 60947-7-1); Enclosure rating IP20 (IEC 60529). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 41 A (IEC 60947-7-1)
-
Rated operational voltage800 V (IEC 60947-7-1)
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
Specifications
| Electrical |
| Rated current Ie |
up to 41 A (IEC 60947-7-1) |
| Rated operational voltage |
800 V (IEC 60947-7-1) |
| Tripping characteristic |
8 mm |
| Mechanical |
| Weight |
144.6 g |
| Mounting |
DIN rail / panel |
| Terminal wire size |
0.2 mm² ... 4 mm² |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Terminal Block specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Terminal Block variants |
| Catalog number |
Rated current Ie |
Rated operational voltage |
Mounting |
|
2322087 (this page) |
up to 41 A (IEC 60947-7-1) |
800 V (IEC 60947-7-1) |
DIN rail / panel |
| 2322100 |
up to 41 A (IEC 60947-7-1) |
800 V (IEC 60947-7-1) |
DIN rail / panel |
| 2322142 |
up to 41 A (IEC 60947-7-1) |
800 V (IEC 60947-7-1) |
DIN rail / panel |
| 2322155 |
up to 41 A (IEC 60947-7-1) |
800 V (IEC 60947-7-1) |
DIN rail / panel |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 2322087 is the device-level element in a Phoenix Contact terminal block installation. It receives the field signals and control supply listed above — 800 V (IEC 60947-7-1) — and switches or conditions the load within the up to 41 A (IEC 60947-7-1) ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 2322087
Phoenix Contact 2322087 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2322087; record the nameplate data of the unit being replaced before selecting an equivalent.
- Mounting: DIN rail / panel — Check this value against the nameplate of the installed unit before ordering.
- Certifications: CE, UL, cULus — Match it to the existing panel and upstream protection.
- Terminal wire size: 0.2 mm² ... 4 mm² — Record it with the other nameplate data when sourcing a replacement.
- Rated operational voltage: 800 V (IEC 60947-7-1) — Confirm the revision of the installed unit before a like-for-like replacement.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about 2322087
Q.For 2322087, what does the specification table state about mounting?
The specification table lists mounting = DIN rail / panel for Phoenix Contact 2322087. Compare it with the nameplate of the installed unit before ordering.
Q.Which value is published under weight for catalog number 2322087?
For 2322087, weight is given as 144.6 g. Confirm this figure against the unit currently in the panel.
Q.Before ordering 2322087, which certifications entry should be checked?
The certifications entry quoted above is CE, UL, cULus. Use the value as the reference when sourcing a current-production equivalent.
Q.What should I include in an enquiry for 2322087?
Send the full catalog number 2322087, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 2322087.
Q.How do I confirm compatibility of 2322087 before ordering?
Match the catalog number 2322087 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.