Phoenix Contact · Connection Cable
2321732 is a Phoenix Contact connection cable with Rated current Ie up to 4 A; Enclosure rating IP67 (IEC 60529); Operating temperature -25...+80 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Enclosure ratingIP67 (IEC 60529)
-
Operating temperature-25...+80 °C (IEC 60068-2-1)
-
CertificationsCE, UL, cULus
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| I/O and communication |
| Flame detection |
IEC 60332-1-2 (raw cable) |
| Mechanical |
| Weight |
426.5 g |
| Terminal wire size |
Round cable set |
| Enclosure rating |
IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+80 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
| Degree of protection |
≥ IP54 (Installation location) |
Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Connection Cable variants |
| Catalog number |
Rated current Ie |
|
2321732 (this page) |
up to 4 A |
| 2321114 |
up to 4 A |
| 2321651 |
up to 4 A |
| 2320490 |
up to 4 A |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 2321732 is the device-level element in a Phoenix Contact connection cable installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides standard panel or DIN-rail support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 2321732
Phoenix Contact 2321732 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2321732; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Flame detection: IEC 60332-1-2 (raw cable) — Verify it in the project documentation before confirming the order.
- Operating temperature: -25...+80 °C (IEC 60068-2-1) — Check this value against the nameplate of the installed unit before ordering.
- Rated current Ie: up to 4 A — Match it to the existing panel and upstream protection.
- Certifications: CE, UL, cULus — Record it with the other nameplate data when sourcing a replacement.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about 2321732
Q.Which value is published under rated current Ie for catalog number 2321732?
For 2321732, rated current Ie is given as up to 4 A. Compare it with the nameplate of the installed unit before ordering.
Q.Before ordering 2321732, which flame detection entry should be checked?
The flame detection entry quoted above is IEC 60332-1-2 (raw cable). Confirm this figure against the unit currently in the panel.
Q.Where can I find the degree of protection data for 2321732?
It is listed in the specification table for Phoenix Contact 2321732 as ≥ IP54 (Installation location). Use the value as the reference when sourcing a current-production equivalent.
Q.What should I include in an enquiry for 2321732?
Send the full catalog number 2321732, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 2321732.
Q.How do I confirm compatibility of 2321732 before ordering?
Match the catalog number 2321732 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.