Phoenix Contact · Power Distributor
2311823 is a Phoenix Contact industrial component with Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1); Mounting DIN rail / panel. It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
-
CertificationsCE, UL, cULus
Specifications
| Electrical |
| Rated insulation voltage Ui |
50 V |
| Tripping characteristic |
12 mm |
| Input voltage range |
85...264 V AC / 110...300 V DC (IEC 61010) |
| Efficiency |
up to 94 % |
| Mechanical |
| Weight |
361 g |
| Mounting |
DIN rail / panel |
| Terminal wire size |
0.5 mm² ... 16 mm² |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Power Distributor specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Power Distributor variants |
| Catalog number |
Mounting |
|
2311823 (this page) |
DIN rail / panel |
| 2315256 |
DIN rail / panel |
| 2315269 |
35 mm DIN rail (IEC 60715) |
| 2315272 |
35 mm DIN rail (IEC 60715) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 2311823 is the device-level element in a Phoenix Contact industrial component installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 2311823
Phoenix Contact 2311823 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2311823; verify the catalog number against your bill of materials before requesting a quotation.
- Tripping characteristic: 12 mm — Check this value against the nameplate of the installed unit before ordering.
- Efficiency: up to 94 % — Match it to the existing panel and upstream protection.
- Rated insulation voltage Ui: 50 V — Record it with the other nameplate data when sourcing a replacement.
- Input voltage range: 85...264 V AC / 110...300 V DC (IEC 61010) — Confirm the revision of the installed unit before a like-for-like replacement.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about 2311823
Q.Where can I find the efficiency data for 2311823?
It is listed in the specification table for Phoenix Contact 2311823 as up to 94 %. Check the revision of the installed unit if the catalog number has been superseded.
Q.For 2311823, what does the specification table state about weight?
The specification table lists weight = 361 g for Phoenix Contact 2311823. Compare it with the nameplate of the installed unit before ordering.
Q.Which value is published under operating temperature for catalog number 2311823?
For 2311823, operating temperature is given as 0...+55 °C (IEC 60068-2-1). Confirm this figure against the unit currently in the panel.
Q.How do I confirm compatibility of 2311823 before ordering?
Match the catalog number 2311823 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the 2311823 replace the unit currently installed in my panel?
Compare catalog number 2311823 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.