Phoenix Contact · Connection Cable
2300009 is a Phoenix Contact connection cable with Rated current Ie up to 4 A; Enclosure rating IP67 (IEC 60529); Operating temperature -25...+80 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Enclosure ratingIP67 (IEC 60529)
-
Operating temperature-25...+80 °C (IEC 60068-2-1)
-
CertificationsCE, UL, cULus
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| Mechanical |
| Weight |
145.8 g |
| Enclosure rating |
IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+80 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
| Degree of protection |
≥ IP54 (Installation location) |
Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Connection Cable variants |
| Catalog number |
Rated current Ie |
|
2300009 (this page) |
up to 4 A |
| 2302023 |
up to 4 A |
| 2302049 |
up to 4 A |
| 2302052 |
up to 4 A |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 2300009 is the device-level element in a Phoenix Contact connection cable installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides standard panel or DIN-rail support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 2300009
Phoenix Contact 2300009 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2300009; always cross-check the catalog number and hardware revision on the nameplate before placing an order.
- Certifications: CE, UL, cULus — Record it with the other nameplate data when sourcing a replacement.
- Rated current Ie: up to 4 A — Confirm the revision of the installed unit before a like-for-like replacement.
- Degree of protection: ≥ IP54 (Installation location) — Use it as the reference when cross-checking a current-production equivalent.
- Weight: 145.8 g — Verify it in the project documentation before confirming the order.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about 2300009
Q.Before ordering 2300009, which degree of protection entry should be checked?
The degree of protection entry quoted above is ≥ IP54 (Installation location). Use the value as the reference when sourcing a current-production equivalent.
Q.Where can I find the operating temperature data for 2300009?
It is listed in the specification table for Phoenix Contact 2300009 as -25...+80 °C (IEC 60068-2-1). Check the revision of the installed unit if the catalog number has been superseded.
Q.For 2300009, what does the specification table state about enclosure rating?
The specification table lists enclosure rating = IP67 (IEC 60529) for Phoenix Contact 2300009. Compare it with the nameplate of the installed unit before ordering.
Q.What should I include in an enquiry for 2300009?
Send the full catalog number 2300009, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 2300009.
Q.How do I confirm compatibility of 2300009 before ordering?
Match the catalog number 2300009 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.