Phoenix Contact 2281157 Terminal Block

SKU: 2281157
Regular price $157.44
In stock (69 units)
Condition
Free standard shipping on orders of $500 and above
100% secure payments
Industry leading quality

Phoenix Contact · Terminal Block

2281157 is a Phoenix Contact terminal block with Rated current Ie up to 41 A (IEC 60947-7-1); Rated operational voltage 800 V (IEC 60947-7-1); Operating temperature -20 °C ... 50 °C. It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.

  • Rated current Ieup to 41 A (IEC 60947-7-1)
  • Rated operational voltage800 V (IEC 60947-7-1)
  • Operating temperature-20 °C ... 50 °C
  • Mounting35 mm DIN rail (IEC 60715)

Specifications

Electrical
Rated current Ie up to 41 A (IEC 60947-7-1)
Rated operational voltage 800 V (IEC 60947-7-1)
Rated insulation voltage Ui 125 V
Tripping characteristic 7 mm
Rated torque 0.5 Nm ... 0.6 Nm
Mechanical
Weight 236.1 g
Mounting 35 mm DIN rail (IEC 60715)
Terminal wire size 0.2 mm² ... 4 mm²
Environment and compliance
Operating temperature -20 °C ... 50 °C
Certifications CE, UL, cULus

Values follow the Phoenix Contact Terminal Block specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.

Model comparison in the same family

Phoenix Contact Terminal Block variants
Catalog number Rated current Ie Rated operational voltage Mounting
2281157 (this page) up to 41 A (IEC 60947-7-1) 800 V (IEC 60947-7-1) 35 mm DIN rail (IEC 60715)
2281115 up to 41 A (IEC 60947-7-1) 800 V (IEC 60947-7-1) 35 mm DIN rail (IEC 60715)
2281128 up to 41 A (IEC 60947-7-1) 800 V (IEC 60947-7-1) 35 mm DIN rail (IEC 60715)
2281131 up to 41 A (IEC 60947-7-1) 800 V (IEC 60947-7-1) 35 mm DIN rail (IEC 60715)

Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.

Where it sits in the control system

The 2281157 is the device-level element in a Phoenix Contact terminal block installation. It receives the field signals and control supply listed above — 800 V (IEC 60947-7-1) — and switches or conditions the load within the up to 41 A (IEC 60947-7-1) ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.

Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.

Selection notes for Phoenix Contact 2281157

Phoenix Contact 2281157 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2281157; record the nameplate data of the unit being replaced before selecting an equivalent.

  • Rated torque: 0.5 Nm ... 0.6 Nm — Match it to the existing panel and upstream protection.
  • Rated current Ie: up to 41 A (IEC 60947-7-1) — Record it with the other nameplate data when sourcing a replacement.
  • Weight: 236.1 g — Confirm the revision of the installed unit before a like-for-like replacement.
  • Rated operational voltage: 800 V (IEC 60947-7-1) — Use it as the reference when cross-checking a current-production equivalent.

Available from stock with datasheet, certificates and a quotation on request.

Common questions about 2281157

Q.For 2281157, what does the specification table state about terminal wire size?

The specification table lists terminal wire size = 0.2 mm² ... 4 mm² for Phoenix Contact 2281157. Use the value as the reference when sourcing a current-production equivalent.

Q.Which value is published under operating temperature for catalog number 2281157?

For 2281157, operating temperature is given as -20 °C ... 50 °C. Check the revision of the installed unit if the catalog number has been superseded.

Q.Before ordering 2281157, which rated torque entry should be checked?

The rated torque entry quoted above is 0.5 Nm ... 0.6 Nm. Compare it with the nameplate of the installed unit before ordering.

Q.What should I include in an enquiry for 2281157?

Send the full catalog number 2281157, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 2281157.

Q.Can the 2281157 replace the unit currently installed in my panel?

Compare catalog number 2281157 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.

Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.

Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. Express shipping is a fixed USD 50.00 for eligible destinations in the United States and Canada.

Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.

Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date the order is placed (order date), against defects in materials and workmanship under normal use.

This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.

★★★★★

No reviews yet. Be the first to review this product!