Phoenix Contact · Heavy-Duty Connector
1771956 is a Phoenix Contact industrial component with Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1); Mounting DIN rail / panel. It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
-
CertificationsCE, UL, cULus
Specifications
| Electrical |
| Rated torque |
1.5 Nm ... 2 Nm (Mounting screw) |
| Mechanical |
| Weight |
157.82 g |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Cutout dimensions |
35 mm |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Heavy-Duty Connector specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Heavy-Duty Connector variants |
| Catalog number |
Mounting |
|
1771956 (this page) |
DIN rail / panel |
| 1771914 |
DIN rail / panel |
| 1771943 |
DIN rail / panel |
| 1771118 |
DIN rail / panel |
Verify model-specific dimensions, terminals and installation requirements in the manufacturer documentation before selecting an alternative.
Where it sits in the control system
The 1771956 is the device-level element in a Phoenix Contact industrial component installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1771956
Phoenix Contact 1771956 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1771956; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Enclosure rating: IP20 (IEC 60529) — Confirm the revision of the installed unit before a like-for-like replacement.
- Rated torque: 1.5 Nm ... 2 Nm (Mounting screw) — Use it as the reference when cross-checking a current-production equivalent.
- Cutout dimensions: 35 mm — Verify it in the project documentation before confirming the order.
- Weight: 157.82 g — Check this value against the nameplate of the installed unit before ordering.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about 1771956
Q.Before ordering 1771956, which rated torque entry should be checked?
The rated torque entry quoted above is 1.5 Nm ... 2 Nm (Mounting screw). Confirm this figure against the unit currently in the panel.
Q.Where can I find the operating temperature data for 1771956?
It is listed in the specification table for Phoenix Contact 1771956 as 0...+55 °C (IEC 60068-2-1). Use the value as the reference when sourcing a current-production equivalent.
Q.For 1771956, what does the specification table state about cutout dimensions?
The specification table lists cutout dimensions = 35 mm for Phoenix Contact 1771956. Check the revision of the installed unit if the catalog number has been superseded.
Q.What should I include in an enquiry for 1771956?
Send the full catalog number 1771956, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1771956.
Q.How do I confirm compatibility of 1771956 before ordering?
Match the catalog number 1771956 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.