Phoenix Contact · HC-B
1771464 is a Phoenix Contact circuit breaker with Rated current Ie 16 A; Tripping characteristic 7 mm; Rated operational voltage <= 440 V AC. It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ie16 A
-
Tripping characteristic7 mm
-
Rated operational voltage<= 440 V AC
-
Enclosure ratingIP20 (IEC 60529)
Specifications
| Electrical |
| Rated current Ie |
16 A |
| Rated operational voltage |
<= 440 V AC |
| Tripping characteristic |
7 mm |
| Rated torque |
0.5 Nm |
| Mechanical |
| Weight |
115.4 g |
| Mounting |
DIN rail / panel |
| Terminal wire size |
0.5 mm² ... 2.5 mm² (applies to stranded conductors with ferrules) |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+60 °C |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact HC-B specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact HC-B variants |
| Catalog number |
Tripping characteristic |
Rated operational voltage |
|
1771464 (this page) |
7 mm |
<= 440 V AC |
| 1408791 |
8 mm ... 10 mm |
500 V |
| 1408793 |
8 mm ... 10 mm |
500 V |
| 1411490 |
8 mm ... 10 mm |
500 V |
Verify model-specific dimensions, terminals and installation requirements in the manufacturer documentation before selecting an alternative.
Where it sits in the control system
The 1771464 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — <= 440 V AC — and switches or conditions the load within the 16 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1771464
Phoenix Contact 1771464 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1771464; verify the catalog number against your bill of materials before requesting a quotation.
- Certifications: CE, UL, cULus — Record it with the other nameplate data when sourcing a replacement.
- Mounting: DIN rail / panel — Confirm the revision of the installed unit before a like-for-like replacement.
- Weight: 115.4 g — Use it as the reference when cross-checking a current-production equivalent.
- Tripping characteristic: 7 mm — Verify it in the project documentation before confirming the order.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about 1771464
Q.For 1771464, what does the specification table state about rated current Ie?
The specification table lists rated current Ie = 16 A for Phoenix Contact 1771464. Check the revision of the installed unit if the catalog number has been superseded.
Q.Which value is published under operating temperature for catalog number 1771464?
For 1771464, operating temperature is given as -25...+60 °C. Compare it with the nameplate of the installed unit before ordering.
Q.Before ordering 1771464, which rated torque entry should be checked?
The rated torque entry quoted above is 0.5 Nm. Confirm this figure against the unit currently in the panel.
Q.What should I include in an enquiry for 1771464?
Send the full catalog number 1771464, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1771464.
Q.How do I confirm compatibility of 1771464 before ordering?
Match the catalog number 1771464 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.