Phoenix Contact · Terminal Block
1766806 is a Phoenix Contact circuit breaker with Rated current Ie up to 41 A (IEC 60947-7-1); Rated operational voltage 800 V (IEC 60947-7-1); Breaking capacity Icu/Ics Tin-plated. It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 41 A (IEC 60947-7-1)
-
Rated operational voltage800 V (IEC 60947-7-1)
-
Breaking capacity Icu/IcsTin-plated
-
Mounting35 mm DIN rail (IEC 60715)
Specifications
| Electrical |
| Rated current Ie |
up to 41 A (IEC 60947-7-1) |
| Rated operational voltage |
800 V (IEC 60947-7-1) |
| Rated insulation voltage Ui |
500 V |
| Rated impulse withstand Uimp |
7.3 kV |
| Breaking capacity Icu/Ics |
Tin-plated |
| Frequency |
3.31 kV |
| Rated speed |
1 octave/min |
| Mechanical |
| Dimensions (H x W x D) |
1 x 1 mm |
| Weight |
2.447 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Environment and compliance |
| Operating temperature |
-40 °C ... 70 °C |
| Certifications |
CE, UL, cULus |
| Humidity |
30 % ... 70 % |
Values follow the Phoenix Contact Terminal Block specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Terminal Block variants |
| Catalog number |
Tripping characteristic |
Breaking capacity Icu/Ics |
Rated operational voltage |
|
1766806 (this page) |
— |
Tin-plated |
800 V (IEC 60947-7-1) |
| 1763087 |
— |
Tin-plated |
800 V (IEC 60947-7-1) |
| 1705469 |
11 mm |
hot-dip tin-plated |
800 V (IEC 60947-7-1) |
| 1710069 |
8 mm |
Tin-plated |
800 V (IEC 60947-7-1) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1766806 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — 800 V (IEC 60947-7-1) — and switches or conditions the load within the up to 41 A (IEC 60947-7-1) ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1766806
Phoenix Contact 1766806 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1766806; record the nameplate data of the unit being replaced before selecting an equivalent.
- Rated speed: 1 octave/min — Check this value against the nameplate of the installed unit before ordering.
- Rated impulse withstand Uimp: 7.3 kV — Match it to the existing panel and upstream protection.
- Rated operational voltage: 800 V (IEC 60947-7-1) — Record it with the other nameplate data when sourcing a replacement.
- Mounting: 35 mm DIN rail (IEC 60715) — Confirm the revision of the installed unit before a like-for-like replacement.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about 1766806
Q.Before ordering 1766806, which operating temperature entry should be checked?
The operating temperature entry quoted above is -40 °C ... 70 °C. Confirm this figure against the unit currently in the panel.
Q.Where can I find the rated speed data for 1766806?
It is listed in the specification table for Phoenix Contact 1766806 as 1 octave/min. Use the value as the reference when sourcing a current-production equivalent.
Q.For 1766806, what does the specification table state about mounting?
The specification table lists mounting = 35 mm DIN rail (IEC 60715) for Phoenix Contact 1766806. Check the revision of the installed unit if the catalog number has been superseded.
Q.What should I include in an enquiry for 1766806?
Send the full catalog number 1766806, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1766806.
Q.Can the 1766806 replace the unit currently installed in my panel?
Compare catalog number 1766806 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.