Phoenix Contact · Terminal Block
1757239 is a Phoenix Contact circuit breaker with Rated current Ie up to 41 A (IEC 60947-7-1); Tripping characteristic 7 mm; Rated operational voltage 800 V (IEC 60947-7-1). It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 41 A (IEC 60947-7-1)
-
Tripping characteristic7 mm
-
Rated operational voltage800 V (IEC 60947-7-1)
-
Breaking capacity Icu/Icshot-dip tin-plated
Specifications
| Electrical |
| Rated current Ie |
up to 41 A (IEC 60947-7-1) |
| Rated operational voltage |
800 V (IEC 60947-7-1) |
| Rated insulation voltage Ui |
250 V |
| Rated impulse withstand Uimp |
4.8 kV |
| Breaking capacity Icu/Ics |
hot-dip tin-plated |
| Tripping characteristic |
7 mm |
| Frequency |
2.21 kV |
| Rated torque |
0.5 Nm ... 0.6 Nm |
| Rated speed |
1 octave/min |
| Mechanical |
| Weight |
41.31 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Terminal type |
Tin (5 µm - 7 µm Sn) |
| Terminal wire size |
0 ° |
| Environment and compliance |
| Operating temperature |
-40 °C ... 70 °C |
| Certifications |
CE, UL, cULus |
| Humidity |
30 % ... 70 % |
Values follow the Phoenix Contact Terminal Block specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Terminal Block variants |
| Catalog number |
Breaking capacity Icu/Ics |
Tripping characteristic |
Rated operational voltage |
|
1757239 (this page) |
hot-dip tin-plated |
7 mm |
800 V (IEC 60947-7-1) |
| 1757242 |
Tin-plated |
— |
800 V (IEC 60947-7-1) |
| 1757297 |
Tin-plated |
— |
800 V (IEC 60947-7-1) |
| 1757019 |
hot-dip tin-plated |
7 mm |
800 V (IEC 60947-7-1) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1757239 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — 800 V (IEC 60947-7-1) — and switches or conditions the load within the up to 41 A (IEC 60947-7-1) ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1757239
Phoenix Contact 1757239 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1757239; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Tripping characteristic: 7 mm — Confirm the revision of the installed unit before a like-for-like replacement.
- Weight: 41.31 g — Use it as the reference when cross-checking a current-production equivalent.
- Terminal wire size: 0 ° — Verify it in the project documentation before confirming the order.
- Rated insulation voltage Ui: 250 V — Check this value against the nameplate of the installed unit before ordering.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about 1757239
Q.Which value is published under rated current Ie for catalog number 1757239?
For 1757239, rated current Ie is given as up to 41 A (IEC 60947-7-1). Compare it with the nameplate of the installed unit before ordering.
Q.Before ordering 1757239, which rated speed entry should be checked?
The rated speed entry quoted above is 1 octave/min. Confirm this figure against the unit currently in the panel.
Q.Where can I find the humidity data for 1757239?
It is listed in the specification table for Phoenix Contact 1757239 as 30 % ... 70 %. Use the value as the reference when sourcing a current-production equivalent.
Q.Can the 1757239 replace the unit currently installed in my panel?
Compare catalog number 1757239 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.What should I include in an enquiry for 1757239?
Send the full catalog number 1757239, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1757239.