Phoenix Contact · Power Distributor
1695401 is a Phoenix Contact industrial component with Rated current Ie 10 A; Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ie10 A
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
Specifications
| Electrical |
| Rated current Ie |
10 A |
| Tripping characteristic |
7 mm |
| Input voltage range |
85...264 V AC / 110...300 V DC (IEC 61010) |
| Efficiency |
up to 94 % |
| Rated torque |
0.4 Nm |
| Mechanical |
| Weight |
180.4 g |
| Mounting |
DIN rail / panel |
| Terminal wire size |
0.14 mm² ... 1.5 mm² |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Power Distributor specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Power Distributor variants |
| Catalog number |
Rated current Ie |
Mounting |
|
1695401 (this page) |
10 A |
DIN rail / panel |
| 1695139 |
12 A |
35 mm DIN rail (IEC 60715) |
| 1695168 |
12 A |
35 mm DIN rail (IEC 60715) |
| 1695171 |
— |
DIN rail / panel |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1695401 is the device-level element in a Phoenix Contact industrial component installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the 10 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1695401
Phoenix Contact 1695401 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1695401; always cross-check the catalog number and hardware revision on the nameplate before placing an order.
- Tripping characteristic: 7 mm — Record it with the other nameplate data when sourcing a replacement.
- Weight: 180.4 g — Confirm the revision of the installed unit before a like-for-like replacement.
- Enclosure rating: IP20 (IEC 60529) — Use it as the reference when cross-checking a current-production equivalent.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Verify it in the project documentation before confirming the order.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about 1695401
Q.For 1695401, what does the specification table state about terminal wire size?
The specification table lists terminal wire size = 0.14 mm² ... 1.5 mm² for Phoenix Contact 1695401. Use the value as the reference when sourcing a current-production equivalent.
Q.Which value is published under efficiency for catalog number 1695401?
For 1695401, efficiency is given as up to 94 %. Check the revision of the installed unit if the catalog number has been superseded.
Q.Before ordering 1695401, which rated current Ie entry should be checked?
The rated current Ie entry quoted above is 10 A. Compare it with the nameplate of the installed unit before ordering.
Q.How do I confirm compatibility of 1695401 before ordering?
Match the catalog number 1695401 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.What should I include in an enquiry for 1695401?
Send the full catalog number 1695401, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1695401.