Phoenix Contact · HC-A
1641604 is a Phoenix Contact connection cable with Rated current Ie up to 4 A; Rated operational voltage 400 V; Enclosure rating IP67 (IEC 60529). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Rated operational voltage400 V
-
Enclosure ratingIP67 (IEC 60529)
-
Operating temperature-25...+80 °C (IEC 60068-2-1)
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| Rated operational voltage |
400 V |
| Rated torque |
3 Nm |
| Mechanical |
| Weight |
34 g |
| Terminal wire size |
0.75 mm² ... 1.5 mm² |
| Enclosure rating |
IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+80 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact HC-A specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Where it sits in the control system
The 1641604 is the device-level element in a Phoenix Contact connection cable installation. It receives the field signals and control supply listed above — 400 V — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides standard panel or DIN-rail support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1641604
Phoenix Contact 1641604 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1641604; always cross-check the catalog number and hardware revision on the nameplate before placing an order.
- Certifications: CE, UL, cULus — Check this value against the nameplate of the installed unit before ordering.
- Weight: 34 g — Match it to the existing panel and upstream protection.
- Operating temperature: -25...+80 °C (IEC 60068-2-1) — Record it with the other nameplate data when sourcing a replacement.
- Terminal wire size: 0.75 mm² ... 1.5 mm² — Confirm the revision of the installed unit before a like-for-like replacement.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about 1641604
Q.Which value is published under rated operational voltage for catalog number 1641604?
For 1641604, rated operational voltage is given as 400 V. Use the value as the reference when sourcing a current-production equivalent.
Q.Before ordering 1641604, which enclosure rating entry should be checked?
The enclosure rating entry quoted above is IP67 (IEC 60529). Check the revision of the installed unit if the catalog number has been superseded.
Q.Where can I find the rated current Ie data for 1641604?
It is listed in the specification table for Phoenix Contact 1641604 as up to 4 A. Compare it with the nameplate of the installed unit before ordering.
Q.Can the 1641604 replace the unit currently installed in my panel?
Compare catalog number 1641604 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.How do I confirm compatibility of 1641604 before ordering?
Match the catalog number 1641604 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.