Phoenix Contact · SF
1605583 is a Phoenix Contact connection cable with Rated current Ie up to 4 A; Enclosure rating IP67 (IEC 60529); Operating temperature -25...+80 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Enclosure ratingIP67 (IEC 60529)
-
Operating temperature-25...+80 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| Mechanical |
| Weight |
116.5 g |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+80 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact SF specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Where it sits in the control system
The 1605583 is the device-level element in a Phoenix Contact connection cable installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1605583
Phoenix Contact 1605583 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1605583; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Operating temperature: -25...+80 °C (IEC 60068-2-1) — Verify it in the project documentation before confirming the order.
- Mounting: DIN rail / panel — Check this value against the nameplate of the installed unit before ordering.
- Weight: 116.5 g — Match it to the existing panel and upstream protection.
- Certifications: CE, UL, cULus — Record it with the other nameplate data when sourcing a replacement.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about 1605583
Q.For 1605583, what does the specification table state about certifications?
The specification table lists certifications = CE, UL, cULus for Phoenix Contact 1605583. Confirm this figure against the unit currently in the panel.
Q.Which value is published under rated current Ie for catalog number 1605583?
For 1605583, rated current Ie is given as up to 4 A. Use the value as the reference when sourcing a current-production equivalent.
Q.Before ordering 1605583, which weight entry should be checked?
The weight entry quoted above is 116.5 g. Check the revision of the installed unit if the catalog number has been superseded.
Q.How do I confirm compatibility of 1605583 before ordering?
Match the catalog number 1605583 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the 1605583 replace the unit currently installed in my panel?
Compare catalog number 1605583 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.