Phoenix Contact · Heavy-Duty Connector
1604324 is a Phoenix Contact industrial component with Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1); Mounting DIN rail / panel. It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
-
CertificationsCE, UL, cULus
Specifications
| Mechanical |
| Weight |
358.63 g |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Cutout dimensions |
35 mm |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Heavy-Duty Connector specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Heavy-Duty Connector variants |
| Catalog number |
Mounting |
|
1604324 (this page) |
DIN rail / panel |
| 1604728 |
DIN rail / panel |
| 1604796 |
DIN rail / panel |
| 1602067 |
DIN rail / panel |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1604324 is the device-level element in a Phoenix Contact industrial component installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1604324
Phoenix Contact 1604324 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1604324; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Check this value against the nameplate of the installed unit before ordering.
- Certifications: CE, UL, cULus — Match it to the existing panel and upstream protection.
- Cutout dimensions: 35 mm — Record it with the other nameplate data when sourcing a replacement.
- Weight: 358.63 g — Confirm the revision of the installed unit before a like-for-like replacement.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about 1604324
Q.Which value is published under operating temperature for catalog number 1604324?
For 1604324, operating temperature is given as 0...+55 °C (IEC 60068-2-1). Confirm this figure against the unit currently in the panel.
Q.Before ordering 1604324, which enclosure rating entry should be checked?
The enclosure rating entry quoted above is IP20 (IEC 60529). Use the value as the reference when sourcing a current-production equivalent.
Q.Where can I find the cutout dimensions data for 1604324?
It is listed in the specification table for Phoenix Contact 1604324 as 35 mm. Check the revision of the installed unit if the catalog number has been superseded.
Q.Can the 1604324 replace the unit currently installed in my panel?
Compare catalog number 1604324 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.What should I include in an enquiry for 1604324?
Send the full catalog number 1604324, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1604324.