Phoenix Contact · HC-D
1580192 is a Phoenix Contact circuit breaker with Rated current Ie 10 A; Tripping characteristic 10 mm; Rated operational voltage 250 V. It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ie10 A
-
Tripping characteristic10 mm
-
Rated operational voltage250 V
-
Enclosure ratingIP20 (IEC 60529)
Specifications
| Electrical |
| Rated current Ie |
10 A |
| Rated operational voltage |
250 V |
| Tripping characteristic |
10 mm |
| Mechanical |
| Weight |
510.5 g |
| Mounting |
DIN rail / panel |
| Terminal wire size |
0.5 mm² ... 2.5 mm² |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact HC-D specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Where it sits in the control system
The 1580192 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — 250 V — and switches or conditions the load within the 10 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1580192
Phoenix Contact 1580192 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1580192; record the nameplate data of the unit being replaced before selecting an equivalent.
- Tripping characteristic: 10 mm — Match it to the existing panel and upstream protection.
- Rated current Ie: 10 A — Record it with the other nameplate data when sourcing a replacement.
- Weight: 510.5 g — Confirm the revision of the installed unit before a like-for-like replacement.
- Terminal wire size: 0.5 mm² ... 2.5 mm² — Use it as the reference when cross-checking a current-production equivalent.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about 1580192
Q.For 1580192, what does the specification table state about enclosure rating?
The specification table lists enclosure rating = IP20 (IEC 60529) for Phoenix Contact 1580192. Use the value as the reference when sourcing a current-production equivalent.
Q.Which value is published under operating temperature for catalog number 1580192?
For 1580192, operating temperature is given as 0...+55 °C (IEC 60068-2-1). Check the revision of the installed unit if the catalog number has been superseded.
Q.Before ordering 1580192, which certifications entry should be checked?
The certifications entry quoted above is CE, UL, cULus. Compare it with the nameplate of the installed unit before ordering.
Q.What should I include in an enquiry for 1580192?
Send the full catalog number 1580192, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1580192.
Q.How do I confirm compatibility of 1580192 before ordering?
Match the catalog number 1580192 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.