Phoenix Contact · Circular Connector
1519765 is a Phoenix Contact industrial component with Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1); Mounting DIN rail / panel. It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
-
CertificationsCE, UL, cULus
Specifications
| Mechanical |
| Weight |
13.037 g |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Circular Connector specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Circular Connector variants |
| Catalog number |
Mounting |
|
1519765 (this page) |
DIN rail / panel |
| 1511789 |
DIN rail / panel |
| 1523984 |
DIN rail / panel |
| 1419933 |
DIN rail / panel |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1519765 is the device-level element in a Phoenix Contact industrial component installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1519765
Phoenix Contact 1519765 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1519765; verify the catalog number against your bill of materials before requesting a quotation.
- Certifications: CE, UL, cULus — Match it to the existing panel and upstream protection.
- Mounting: DIN rail / panel — Record it with the other nameplate data when sourcing a replacement.
- Enclosure rating: IP20 (IEC 60529) — Confirm the revision of the installed unit before a like-for-like replacement.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Use it as the reference when cross-checking a current-production equivalent.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about 1519765
Q.Which value is published under enclosure rating for catalog number 1519765?
For 1519765, enclosure rating is given as IP20 (IEC 60529). Compare it with the nameplate of the installed unit before ordering.
Q.Before ordering 1519765, which certifications entry should be checked?
The certifications entry quoted above is CE, UL, cULus. Confirm this figure against the unit currently in the panel.
Q.Where can I find the operating temperature data for 1519765?
It is listed in the specification table for Phoenix Contact 1519765 as 0...+55 °C (IEC 60068-2-1). Use the value as the reference when sourcing a current-production equivalent.
Q.Can the 1519765 replace the unit currently installed in my panel?
Compare catalog number 1519765 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.How do I confirm compatibility of 1519765 before ordering?
Match the catalog number 1519765 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.