Phoenix Contact · Connection Cable
1457461 is a Phoenix Contact connection cable with Rated current Ie up to 4 A; Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| I/O and communication |
| Flame detection |
in accordance with UL 758/1581 FT2 |
| Mechanical |
| Weight |
57 kg/km |
| Mounting |
DIN rail / panel |
| Terminal wire size |
42x 0.15 mm |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Connection Cable variants |
| Catalog number |
Rated current Ie |
|
1457461 (this page) |
up to 4 A |
| 1453180 |
up to 4 A |
| 1458570 |
up to 4 A |
| 1401109 |
up to 4 A |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1457461 is the device-level element in a Phoenix Contact connection cable installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1457461
Phoenix Contact 1457461 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1457461; record the nameplate data of the unit being replaced before selecting an equivalent.
- Rated current Ie: up to 4 A — Check this value against the nameplate of the installed unit before ordering.
- Flame detection: in accordance with UL 758/1581 FT2 — Match it to the existing panel and upstream protection.
- Certifications: CE, UL, cULus — Record it with the other nameplate data when sourcing a replacement.
- Weight: 57 kg/km — Confirm the revision of the installed unit before a like-for-like replacement.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about 1457461
Q.Where can I find the certifications data for 1457461?
It is listed in the specification table for Phoenix Contact 1457461 as CE, UL, cULus. Compare it with the nameplate of the installed unit before ordering.
Q.For 1457461, what does the specification table state about mounting?
The specification table lists mounting = DIN rail / panel for Phoenix Contact 1457461. Confirm this figure against the unit currently in the panel.
Q.Which value is published under operating temperature for catalog number 1457461?
For 1457461, operating temperature is given as 0...+55 °C (IEC 60068-2-1). Use the value as the reference when sourcing a current-production equivalent.
Q.How do I confirm compatibility of 1457461 before ordering?
Match the catalog number 1457461 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the 1457461 replace the unit currently installed in my panel?
Compare catalog number 1457461 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.