Phoenix Contact · Connection Cable
1424452 is a Phoenix Contact circuit breaker with Rated current Ie up to 4 A; Tripping characteristic 10 mm; Rated operational voltage 230 V (Conductor-PE). It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Tripping characteristic10 mm
-
Rated operational voltage230 V (Conductor-PE)
-
Enclosure ratingIP67 (IEC 60529)
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| Rated operational voltage |
230 V (Conductor-PE) |
| Tripping characteristic |
10 mm |
| Mechanical |
| Weight |
137 g |
| Terminal wire size |
0.14 mm² ... 1.5 mm² (with ferrule) |
| Enclosure rating |
IP67 (IEC 60529) |
| Cutout dimensions |
21 mm |
| Environment and compliance |
| Operating temperature |
-25...+80 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Connection Cable variants |
| Catalog number |
Tripping characteristic |
|
1424452 (this page) |
10 mm |
| 1424098 |
— |
| 1424682 |
7 mm |
| 1421305 |
— |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1424452 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — 230 V (Conductor-PE) — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides standard panel or DIN-rail support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1424452
Phoenix Contact 1424452 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1424452; record the nameplate data of the unit being replaced before selecting an equivalent.
- Certifications: CE, UL, cULus — Use it as the reference when cross-checking a current-production equivalent.
- Operating temperature: -25...+80 °C (IEC 60068-2-1) — Verify it in the project documentation before confirming the order.
- Cutout dimensions: 21 mm — Check this value against the nameplate of the installed unit before ordering.
- Rated current Ie: up to 4 A — Match it to the existing panel and upstream protection.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about 1424452
Q.Where can I find the weight data for 1424452?
It is listed in the specification table for Phoenix Contact 1424452 as 137 g. Use the value as the reference when sourcing a current-production equivalent.
Q.For 1424452, what does the specification table state about cutout dimensions?
The specification table lists cutout dimensions = 21 mm for Phoenix Contact 1424452. Check the revision of the installed unit if the catalog number has been superseded.
Q.Which value is published under rated current Ie for catalog number 1424452?
For 1424452, rated current Ie is given as up to 4 A. Compare it with the nameplate of the installed unit before ordering.
Q.What should I include in an enquiry for 1424452?
Send the full catalog number 1424452, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1424452.
Q.Can the 1424452 replace the unit currently installed in my panel?
Compare catalog number 1424452 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.