Phoenix Contact · Gateway
1357840 is a Phoenix Contact circuit breaker with Breaking capacity Icu/Ics Ethernet in RJ45 twisted pair; Supply voltage 24 V DC (IEC 61131-2); Enclosure rating IP20 (IEC 60529). It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Breaking capacity Icu/IcsEthernet in RJ45 twisted pair
-
Supply voltage24 V DC (IEC 61131-2)
-
Enclosure ratingIP20 (IEC 60529)
-
Mounting35 mm DIN rail (IEC 60715)
Specifications
| Electrical |
| Breaking capacity Icu/Ics |
Ethernet in RJ45 twisted pair |
| Coil voltage |
24 V DC (typical) |
| Supply voltage |
24 V DC (IEC 61131-2) |
| Rated speed |
10/100/1000 Mbps |
| I/O and communication |
| Protocols |
ESP tunnel / ESP transport |
| Mechanical |
| Weight |
388 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Terminal wire size |
0.2 mm² ... 1.5 mm² |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
| Humidity |
5 % ... 95 % (non-condensing) |
Values follow the Phoenix Contact Gateway specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Gateway variants |
| Catalog number |
Mounting |
|
1357840 (this page) |
35 mm DIN rail (IEC 60715) |
| 2297620 |
35 mm DIN rail (IEC 60715) |
| 2316364 |
35 mm DIN rail (IEC 60715) |
| 2700197 |
DIN rail / panel |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1357840 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — 24 V DC (IEC 61131-2) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1357840
Phoenix Contact 1357840 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1357840; record the nameplate data of the unit being replaced before selecting an equivalent.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Match it to the existing panel and upstream protection.
- Certifications: CE, UL, cULus — Record it with the other nameplate data when sourcing a replacement.
- Breaking capacity Icu/Ics: Ethernet in RJ45 twisted pair — Confirm the revision of the installed unit before a like-for-like replacement.
- Mounting: 35 mm DIN rail (IEC 60715) — Use it as the reference when cross-checking a current-production equivalent.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about 1357840
Q.Before ordering 1357840, which rated speed entry should be checked?
The rated speed entry quoted above is 10/100/1000 Mbps. Check the revision of the installed unit if the catalog number has been superseded.
Q.Where can I find the protocols data for 1357840?
It is listed in the specification table for Phoenix Contact 1357840 as ESP tunnel / ESP transport. Compare it with the nameplate of the installed unit before ordering.
Q.For 1357840, what does the specification table state about certifications?
The specification table lists certifications = CE, UL, cULus for Phoenix Contact 1357840. Confirm this figure against the unit currently in the panel.
Q.How do I confirm compatibility of 1357840 before ordering?
Match the catalog number 1357840 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the 1357840 replace the unit currently installed in my panel?
Compare catalog number 1357840 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.