Phoenix Contact · Network Switch
1085219 is a Phoenix Contact circuit breaker with Tripping characteristic 10 mm; Breaking capacity Icu/Ics Ethernet in RJ45 twisted pair; Supply voltage 24 V DC (IEC 61131-2). It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Tripping characteristic10 mm
-
Breaking capacity Icu/IcsEthernet in RJ45 twisted pair
-
Supply voltage24 V DC (IEC 61131-2)
-
Enclosure ratingIP20 (IEC 60529)
Specifications
| Electrical |
| Breaking capacity Icu/Ics |
Ethernet in RJ45 twisted pair |
| Tripping characteristic |
10 mm |
| Supply voltage |
24 V DC (IEC 61131-2) |
| Rated speed |
10/100/1000 Mbps |
| Mechanical |
| Weight |
535 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Terminal wire size |
0.2 mm² ... 2.5 mm² |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
| Humidity |
5 % ... 95 % (non-condensing) |
Values follow the Phoenix Contact Network Switch specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Network Switch variants |
| Catalog number |
Tripping characteristic |
Breaking capacity Icu/Ics |
|
1085219 (this page) |
10 mm |
Ethernet in RJ45 twisted pair |
| 1085243 |
10 mm |
Ethernet in RJ45 twisted pair |
| 1085254 |
10 mm |
Ethernet in RJ45 twisted pair |
| 1085255 |
10 mm |
Ethernet in RJ45 twisted pair |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1085219 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — 24 V DC (IEC 61131-2) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1085219
Phoenix Contact 1085219 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1085219; verify the catalog number against your bill of materials before requesting a quotation.
- Tripping characteristic: 10 mm — Verify it in the project documentation before confirming the order.
- Breaking capacity Icu/Ics: Ethernet in RJ45 twisted pair — Check this value against the nameplate of the installed unit before ordering.
- Enclosure rating: IP20 (IEC 60529) — Match it to the existing panel and upstream protection.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Record it with the other nameplate data when sourcing a replacement.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about 1085219
Q.For 1085219, what does the specification table state about tripping characteristic?
The specification table lists tripping characteristic = 10 mm for Phoenix Contact 1085219. Compare it with the nameplate of the installed unit before ordering.
Q.Which value is published under certifications for catalog number 1085219?
For 1085219, certifications is given as CE, UL, cULus. Confirm this figure against the unit currently in the panel.
Q.Before ordering 1085219, which breaking capacity Icu/Ics entry should be checked?
The breaking capacity Icu/Ics entry quoted above is Ethernet in RJ45 twisted pair. Use the value as the reference when sourcing a current-production equivalent.
Q.What should I include in an enquiry for 1085219?
Send the full catalog number 1085219, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1085219.
Q.How do I confirm compatibility of 1085219 before ordering?
Match the catalog number 1085219 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.