Phoenix Contact · Terminal Block
1078963 is a Phoenix Contact terminal block with Rated current Ie up to 41 A (IEC 60947-7-1); Rated operational voltage 800 V (IEC 60947-7-1); Operating temperature -60 °C ... 110 °C. It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 41 A (IEC 60947-7-1)
-
Rated operational voltage800 V (IEC 60947-7-1)
-
Operating temperature-60 °C ... 110 °C
-
Mounting35 mm DIN rail (IEC 60715)
Specifications
| Electrical |
| Rated current Ie |
up to 41 A (IEC 60947-7-1) |
| Rated operational voltage |
800 V (IEC 60947-7-1) |
| Tripping characteristic |
8 mm ... 10 mm |
| Frequency |
f1= 5 Hz to f2= 250 Hz |
| Mechanical |
| Weight |
7.84 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Terminal wire size |
0.14 mm² ... 4 mm² |
| Environment and compliance |
| Operating temperature |
-60 °C ... 110 °C |
| Certifications |
CE, UL, cULus |
| Humidity |
20 % ... 90 % |
Values follow the Phoenix Contact Terminal Block specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Terminal Block variants |
| Catalog number |
Mounting |
Rated current Ie |
Rated operational voltage |
|
1078963 (this page) |
35 mm DIN rail (IEC 60715) |
up to 41 A (IEC 60947-7-1) |
800 V (IEC 60947-7-1) |
| 1078960 |
35 mm DIN rail (IEC 60715) |
up to 41 A (IEC 60947-7-1) |
800 V (IEC 60947-7-1) |
| 1019440 |
DIN rail / panel |
up to 41 A (IEC 60947-7-1) |
800 V (IEC 60947-7-1) |
| 1045474 |
35 mm DIN rail (IEC 60715) |
up to 41 A (IEC 60947-7-1) |
800 V (IEC 60947-7-1) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1078963 is the device-level element in a Phoenix Contact terminal block installation. It receives the field signals and control supply listed above — 800 V (IEC 60947-7-1) — and switches or conditions the load within the up to 41 A (IEC 60947-7-1) ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1078963
Phoenix Contact 1078963 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1078963; record the nameplate data of the unit being replaced before selecting an equivalent.
- Tripping characteristic: 8 mm ... 10 mm — Confirm the revision of the installed unit before a like-for-like replacement.
- Rated current Ie: up to 41 A (IEC 60947-7-1) — Use it as the reference when cross-checking a current-production equivalent.
- Frequency: f1= 5 Hz to f2= 250 Hz — Verify it in the project documentation before confirming the order.
- Rated operational voltage: 800 V (IEC 60947-7-1) — Check this value against the nameplate of the installed unit before ordering.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about 1078963
Q.For 1078963, what does the specification table state about certifications?
The specification table lists certifications = CE, UL, cULus for Phoenix Contact 1078963. Use the value as the reference when sourcing a current-production equivalent.
Q.Which value is published under tripping characteristic for catalog number 1078963?
For 1078963, tripping characteristic is given as 8 mm ... 10 mm. Check the revision of the installed unit if the catalog number has been superseded.
Q.Before ordering 1078963, which operating temperature entry should be checked?
The operating temperature entry quoted above is -60 °C ... 110 °C. Compare it with the nameplate of the installed unit before ordering.
Q.Can the 1078963 replace the unit currently installed in my panel?
Compare catalog number 1078963 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.What should I include in an enquiry for 1078963?
Send the full catalog number 1078963, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1078963.