Phoenix Contact · Terminal Block
0443049 is a Phoenix Contact terminal block with Rated current Ie up to 41 A (IEC 60947-7-1); Rated operational voltage 800 V (IEC 60947-7-1); Operating temperature -60 °C ... 110 °C. It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 41 A (IEC 60947-7-1)
-
Rated operational voltage800 V (IEC 60947-7-1)
-
Operating temperature-60 °C ... 110 °C
-
Mounting35 mm DIN rail (IEC 60715)
Specifications
| Electrical |
| Rated current Ie |
up to 41 A (IEC 60947-7-1) |
| Rated operational voltage |
800 V (IEC 60947-7-1) |
| Tripping characteristic |
24 mm |
| Rated torque |
6 ... 8 Nm |
| Mechanical |
| Weight |
182.7 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Terminal wire size |
16 mm² ... 50 mm² |
| Environment and compliance |
| Operating temperature |
-60 °C ... 110 °C |
| Certifications |
CE, UL, cULus |
| Humidity |
20 % ... 90 % |
Values follow the Phoenix Contact Terminal Block specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Terminal Block variants |
| Catalog number |
Mounting |
Rated current Ie |
Rated operational voltage |
|
0443049 (this page) |
35 mm DIN rail (IEC 60715) |
up to 41 A (IEC 60947-7-1) |
800 V (IEC 60947-7-1) |
| 0443023 |
DIN rail / panel |
up to 41 A (IEC 60947-7-1) |
800 V (IEC 60947-7-1) |
| 0443052 |
DIN rail / panel |
up to 41 A (IEC 60947-7-1) |
800 V (IEC 60947-7-1) |
| 0441012 |
DIN rail / panel |
up to 41 A (IEC 60947-7-1) |
800 V (IEC 60947-7-1) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 0443049 is the device-level element in a Phoenix Contact terminal block installation. It receives the field signals and control supply listed above — 800 V (IEC 60947-7-1) — and switches or conditions the load within the up to 41 A (IEC 60947-7-1) ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 0443049
Phoenix Contact 0443049 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 0443049; confirm the installed unit's part number and revision so the replacement matches both electrically and mechanically.
- Operating temperature: -60 °C ... 110 °C — Verify it in the project documentation before confirming the order.
- Rated operational voltage: 800 V (IEC 60947-7-1) — Check this value against the nameplate of the installed unit before ordering.
- Tripping characteristic: 24 mm — Match it to the existing panel and upstream protection.
- Weight: 182.7 g — Record it with the other nameplate data when sourcing a replacement.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about 0443049
Q.Where can I find the weight data for 0443049?
It is listed in the specification table for Phoenix Contact 0443049 as 182.7 g. Compare it with the nameplate of the installed unit before ordering.
Q.For 0443049, what does the specification table state about rated current Ie?
The specification table lists rated current Ie = up to 41 A (IEC 60947-7-1) for Phoenix Contact 0443049. Confirm this figure against the unit currently in the panel.
Q.Which value is published under rated operational voltage for catalog number 0443049?
For 0443049, rated operational voltage is given as 800 V (IEC 60947-7-1). Use the value as the reference when sourcing a current-production equivalent.
Q.How do I confirm compatibility of 0443049 before ordering?
Match the catalog number 0443049 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.What should I include in an enquiry for 0443049?
Send the full catalog number 0443049, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 0443049.