Omron · Industrial automation component
ZXEV04T is an Omron industrial component with Supply voltage 10...30 V DC (IEC 60947-5-2); Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltage10...30 V DC (IEC 60947-5-2)
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
Specifications
| Electrical |
| Supply voltage |
10...30 V DC (IEC 60947-5-2) |
| I/O and communication |
| Response time |
< 1 ms |
| Mechanical |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Omron Industrial automation component specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Omron Industrial automation component variants |
| Catalog number |
Mounting |
|
ZXEV04T (this page) |
DIN rail / panel |
| ZXEDR5T |
DIN rail / panel |
| ZXEM02T |
DIN rail / panel |
| ZX1LD300A812M |
DIN rail / panel |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The ZXEV04T is the device-level element in an Omron industrial component installation. It receives the field signals and control supply listed above — 10...30 V DC (IEC 60947-5-2) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Omron ZXEV04T
Omron ZXEV04T — Sensor or detector for object detection, distance measurement and status feedback on production lines. The figures below are taken from the specification table on this page for catalog number ZXEV04T; record the nameplate data of the unit being replaced before selecting an equivalent.
- Supply voltage: 10...30 V DC (IEC 60947-5-2) — Use it as the reference when cross-checking a current-production equivalent.
- Response time: < 1 ms — Verify it in the project documentation before confirming the order.
- Certifications: CE, UL, cULus — Check this value against the nameplate of the installed unit before ordering.
- Mounting: DIN rail / panel — Match it to the existing panel and upstream protection.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about ZXEV04T
Q.Which value is published under supply voltage for catalog number ZXEV04T?
For ZXEV04T, supply voltage is given as 10...30 V DC (IEC 60947-5-2). Use the value as the reference when sourcing a current-production equivalent.
Q.Before ordering ZXEV04T, which mounting entry should be checked?
The mounting entry quoted above is DIN rail / panel. Check the revision of the installed unit if the catalog number has been superseded.
Q.Where can I find the certifications data for ZXEV04T?
It is listed in the specification table for Omron ZXEV04T as CE, UL, cULus. Compare it with the nameplate of the installed unit before ordering.
Q.Can the ZXEV04T replace the unit currently installed in my panel?
Compare catalog number ZXEV04T and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.What should I include in an enquiry for ZXEV04T?
Send the full catalog number ZXEV04T, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Omron ZXEV04T.