Omron · HMI / operator panel
NA515W101B is an Omron HMI panel with Supply voltage 24 V DC (IEC 60950-1); Enclosure rating IP65 (IEC 60529); Communication ports RS-232/422/485, Ethernet. It is used in machine operator panels, control cabinets, local HMI stations where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltage24 V DC (IEC 60950-1)
-
Enclosure ratingIP65 (IEC 60529)
-
MountingPanel mount / DIN rail
Specifications
| Electrical |
| Supply voltage |
24 V DC (IEC 60950-1) |
| Mechanical |
| Mounting |
Panel mount / DIN rail |
| Enclosure rating |
IP65 (IEC 60529) |
| Touch type |
resistive or projective capacitive |
| Environment and compliance |
| Operating temperature |
0...+50 °C |
| Certifications |
CE, UL, cULus |
Values follow the Omron HMI / operator panel specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Omron HMI / operator panel variants |
| Catalog number |
Supply voltage |
|
NA515W101B (this page) |
24 V DC (IEC 60950-1) |
| NA515W101S |
24 V DC (IEC 60950-1) |
| NA515W101SV1 |
24 V DC (IEC 60950-1) |
| NA512W101BV1 |
24 V DC (IEC 60950-1) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The NA515W101B is the device-level element in an Omron HMI panel installation. It receives the field signals and control supply listed above — 24 V DC (IEC 60950-1) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in machine operator panels, control cabinets, local HMI stations, where the unit is matched to the original catalog number and the enclosure provides Panel mount / DIN rail support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Omron NA515W101B
Omron NA515W101B — Operator panel for visualisation, parameter setting and alarm handling on a control cabinet door or console. The figures below are taken from the specification table on this page for catalog number NA515W101B; record the nameplate data of the unit being replaced before selecting an equivalent.
- Enclosure rating: IP65 (IEC 60529) — Record it with the other nameplate data when sourcing a replacement.
- Operating temperature: 0...+50 °C — Confirm the revision of the installed unit before a like-for-like replacement.
- Certifications: CE, UL, cULus — Use it as the reference when cross-checking a current-production equivalent.
- Mounting: Panel mount / DIN rail — Verify it in the project documentation before confirming the order.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about NA515W101B
Q.Which value is published under mounting for catalog number NA515W101B?
For NA515W101B, mounting is given as Panel mount / DIN rail. Compare it with the nameplate of the installed unit before ordering.
Q.Before ordering NA515W101B, which enclosure rating entry should be checked?
The enclosure rating entry quoted above is IP65 (IEC 60529). Confirm this figure against the unit currently in the panel.
Q.Where can I find the supply voltage data for NA515W101B?
It is listed in the specification table for Omron NA515W101B as 24 V DC (IEC 60950-1). Use the value as the reference when sourcing a current-production equivalent.
Q.Can the NA515W101B replace the unit currently installed in my panel?
Compare catalog number NA515W101B and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.What should I include in an enquiry for NA515W101B?
Send the full catalog number NA515W101B, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Omron NA515W101B.