Omron · CP-series compact PLC / extension
CP1EE10DT1A is an Omron PLC module with Supply voltage 24 V DC (IEC 61131-2); Enclosure rating IP20 (IEC 60529); Communication ports EtherNet/IP, EtherCAT. It is used in packaging machines, conveyor transfer cells, small process skids where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltage24 V DC (IEC 61131-2)
-
Enclosure ratingIP20 (IEC 60529)
-
Mounting35 mm DIN rail (IEC 60715)
Specifications
| Electrical |
| Supply voltage |
24 V DC (IEC 61131-2) |
| Power consumption |
50 VA/100 VAC max. |
| I/O and communication |
| Resolution |
1/2000 (full scale) |
| Mechanical |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Omron CP-series compact PLC / extension specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Omron CP-series compact PLC / extension variants |
| Catalog number |
Output stage |
Supply voltage |
|
CP1EE10DT1A (this page) |
— |
24 V DC (IEC 61131-2) |
| CP1EE10DTA |
— |
24 V DC (IEC 61131-2) |
| CP1E-E10DR-A |
Relay |
24 V DC (IEC 61131-2) |
| CP1E-E10DR-D |
Relay |
24 V DC (IEC 61131-2) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The CP1EE10DT1A is the device-level element in an Omron PLC module installation. It receives the field signals and control supply listed above — 24 V DC (IEC 61131-2) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in packaging machines, conveyor transfer cells, small process skids, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Omron CP1EE10DT1A
Omron CP1EE10DT1A — PLC / CPU module used as the device-level control core in an automation panel, handling logic, timing and communication tasks. The figures below are taken from the specification table on this page for catalog number CP1EE10DT1A; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Resolution: 1/2000 (full scale) — Use it as the reference when cross-checking a current-production equivalent.
- Power consumption: 50 VA/100 VAC max. — Verify it in the project documentation before confirming the order.
- Mounting: 35 mm DIN rail (IEC 60715) — Check this value against the nameplate of the installed unit before ordering.
- Enclosure rating: IP20 (IEC 60529) — Match it to the existing panel and upstream protection.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about CP1EE10DT1A
Q.Where can I find the certifications data for CP1EE10DT1A?
It is listed in the specification table for Omron CP1EE10DT1A as CE, UL, cULus. Compare it with the nameplate of the installed unit before ordering.
Q.For CP1EE10DT1A, what does the specification table state about mounting?
The specification table lists mounting = 35 mm DIN rail (IEC 60715) for Omron CP1EE10DT1A. Confirm this figure against the unit currently in the panel.
Q.Which value is published under enclosure rating for catalog number CP1EE10DT1A?
For CP1EE10DT1A, enclosure rating is given as IP20 (IEC 60529). Use the value as the reference when sourcing a current-production equivalent.
Q.What should I include in an enquiry for CP1EE10DT1A?
Send the full catalog number CP1EE10DT1A, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Omron CP1EE10DT1A.
Q.How do I confirm compatibility of CP1EE10DT1A before ordering?
Match the catalog number CP1EE10DT1A and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.