Omron · CP-series compact PLC / extension
CP1E-N60S1DT1-D is an Omron PLC module with Output stage Transistor; Supply voltage 24 V DC (IEC 61131-2); Enclosure rating IP20 (IEC 60529). It is used in packaging machines, conveyor transfer cells, small process skids where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Output stageTransistor
-
Supply voltage24 V DC (IEC 61131-2)
-
Enclosure ratingIP20 (IEC 60529)
Specifications
| Electrical |
| Supply voltage |
24 V DC (IEC 61131-2) |
| I/O and communication |
| Output stage |
Transistor |
| Mechanical |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Omron CP-series compact PLC / extension specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Omron CP-series compact PLC / extension variants |
| Catalog number |
Output stage |
Supply voltage |
|
CP1E-N60S1DT1-D (this page) |
Transistor |
24 V DC (IEC 61131-2) |
| CP1E-N60S1DT-D |
Transistor |
24 V DC (IEC 61131-2) |
| CP1E-N60DR-A |
Relay |
24 V DC (IEC 61131-2) |
| CP1E-N60DT1-D |
Transistor |
24 V DC (IEC 61131-2) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The CP1E-N60S1DT1-D is the device-level element in an Omron PLC module installation. It receives the field signals and control supply listed above — 24 V DC (IEC 61131-2) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in packaging machines, conveyor transfer cells, small process skids, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Omron CP1E-N60S1DT1-D
Omron CP1E-N60S1DT1-D — PLC / CPU module used as the device-level control core in an automation panel, handling logic, timing and communication tasks. The figures below are taken from the specification table on this page for catalog number CP1E-N60S1DT1-D; confirm the installed unit's part number and revision so the replacement matches both electrically and mechanically.
- Certifications: CE, UL, cULus — Use it as the reference when cross-checking a current-production equivalent.
- Output stage: Transistor — Verify it in the project documentation before confirming the order.
- Mounting: 35 mm DIN rail (IEC 60715) — Check this value against the nameplate of the installed unit before ordering.
- Supply voltage: 24 V DC (IEC 61131-2) — Match it to the existing panel and upstream protection.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about CP1E-N60S1DT1-D
Q.Which value is published under output stage for catalog number CP1E-N60S1DT1-D?
For CP1E-N60S1DT1-D, output stage is given as Transistor. Compare it with the nameplate of the installed unit before ordering.
Q.Before ordering CP1E-N60S1DT1-D, which enclosure rating entry should be checked?
The enclosure rating entry quoted above is IP20 (IEC 60529). Confirm this figure against the unit currently in the panel.
Q.Where can I find the mounting data for CP1E-N60S1DT1-D?
It is listed in the specification table for Omron CP1E-N60S1DT1-D as 35 mm DIN rail (IEC 60715). Use the value as the reference when sourcing a current-production equivalent.
Q.How do I confirm compatibility of CP1E-N60S1DT1-D before ordering?
Match the catalog number CP1E-N60S1DT1-D and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the CP1E-N60S1DT1-D replace the unit currently installed in my panel?
Compare catalog number CP1E-N60S1DT1-D and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.