Omron · MX2 (3G3AX-MX2)
3G3AX-MX2-CRT-E is an Omron industrial component with Enclosure rating IP20 (open type); Operating temperature -10 ... +50 C; Mounting plug-in module on MX2 inverter. It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Enclosure ratingIP20 (open type)
-
Operating temperature-10 ... +50 C
-
Mountingplug-in module on MX2 inverter
-
CertificationsCE, UL, cUL, CSA, RoHS
Specifications
| I/O and communication |
| Communication ports |
CompoNet (slave) |
| Mechanical |
| Weight |
100 g max |
| Mounting |
plug-in module on MX2 inverter |
| Enclosure rating |
IP20 (open type) |
| Environment and compliance |
| Operating temperature |
-10 ... +50 C |
| Storage temperature |
-20 ... +65 C |
| Certifications |
CE, UL, cUL, CSA, RoHS |
| Humidity |
20 ... 90 % RH (non-condensing) |
Values follow the Omron MX2 (3G3AX-MX2) specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Omron MX2 (3G3AX-MX2) variants |
| Catalog number |
Mounting |
|
3G3AX-MX2-CRT-E (this page) |
plug-in module on MX2 inverter |
| 3G3AX-MX2-ECT |
plug-in module on MX2 inverter |
| 3G3AX-MX2-EIO15-E |
DIN rail / panel |
| 3G3AX-MX2-EIP-A |
directly on MX2 inverter (option board) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 3G3AX-MX2-CRT-E is the device-level element in an Omron industrial component installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides plug-in module on MX2 inverter support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Omron 3G3AX-MX2-CRT-E
Omron 3G3AX-MX2-CRT-E — CompoNet communication unit (network option for the MX2 inverter series). The figures below are taken from the specification table on this page for catalog number 3G3AX-MX2-CRT-E; confirm the installed unit's part number and revision so the replacement matches both electrically and mechanically.
- Certifications: CE, UL, cUL, CSA, RoHS — Match it to the existing panel and upstream protection.
- Humidity: 20 ... 90 % RH (non-condensing) — Record it with the other nameplate data when sourcing a replacement.
- Storage temperature: -20 ... +65 C — Confirm the revision of the installed unit before a like-for-like replacement.
- Communication ports: CompoNet (slave) — Use it as the reference when cross-checking a current-production equivalent.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about 3G3AX-MX2-CRT-E
Q.Which value is published under communication ports for catalog number 3G3AX-MX2-CRT-E?
For 3G3AX-MX2-CRT-E, communication ports is given as CompoNet (slave). Confirm this figure against the unit currently in the panel.
Q.Before ordering 3G3AX-MX2-CRT-E, which weight entry should be checked?
The weight entry quoted above is 100 g max. Use the value as the reference when sourcing a current-production equivalent.
Q.Where can I find the humidity data for 3G3AX-MX2-CRT-E?
It is listed in the specification table for Omron 3G3AX-MX2-CRT-E as 20 ... 90 % RH (non-condensing). Check the revision of the installed unit if the catalog number has been superseded.
Q.What should I include in an enquiry for 3G3AX-MX2-CRT-E?
Send the full catalog number 3G3AX-MX2-CRT-E, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Omron 3G3AX-MX2-CRT-E.
Q.Can the 3G3AX-MX2-CRT-E replace the unit currently installed in my panel?
Compare catalog number 3G3AX-MX2-CRT-E and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.