Couldn't load pickup availability
Got questions?
Feel free to get in touch
Ask an expert!
Mitsubishi · FR-A800
FRA84000023E260 is a Mitsubishi variable-frequency drive with Overload capacity 150 % for 60 s (IEC 61800-2); Enclosure rating IP20 (IEC 60529); Frequency 50/60 Hz (IEC 61800-2). It is used in pump sets, conveyor belts, fan and compressor drives where the installed unit is matched to the original catalog number and a compact, documented part is required.
| Electrical | |
| Supply voltage | 1-phase 200...240 V / 3-phase 380...480 V AC |
|---|---|
| Input voltage range | 380-480 VAC |
| Output current | 2.3 A |
| Frequency | 50/60 Hz (IEC 61800-2) |
| Control method | V/f, sensorless vector (IEC 61800-2) |
| Overload capacity | 150 % for 60 s (IEC 61800-2) |
| Mechanical | |
| Mounting | 35 mm DIN rail or screw |
| Enclosure rating | IP20 (IEC 60529) |
| Environment and compliance | |
| Operating temperature | -10...+60 °C (IEC 60068-2-1) |
| Certifications | CE, UL, cULus |
Values follow the Mitsubishi FR-A800 specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
| Mitsubishi FR-A800 variants | |||
| Catalog number | Overload capacity | Frequency | |
|---|---|---|---|
| FRA84000023E260 (this page) | 150 % for 60 s (IEC 61800-2) | 50/60 Hz (IEC 61800-2) | |
| FRA84000038E260 | 150 % for 60 s (IEC 61800-2) | 50/60 Hz (IEC 61800-2) | |
| FRA84000052E260 | 150 % for 60 s (IEC 61800-2) | 50/60 Hz (IEC 61800-2) | |
| FRA84000083E260 | 150 % for 60 s (IEC 61800-2) | 50/60 Hz (IEC 61800-2) | |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
The FRA84000023E260 is the device-level element in a Mitsubishi variable-frequency drive installation. It receives the field signals and control supply listed above — 1-phase 200...240 V / 3-phase 380...480 V AC — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in pump sets, conveyor belts, fan and compressor drives, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail or screw support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Mitsubishi FRA84000023E260 — Variable frequency drive for motor speed and torque control in pumps, fans, conveyors and general industrial machinery. The figures below are taken from the specification table on this page for catalog number FRA84000023E260; always cross-check the catalog number and hardware revision on the nameplate before placing an order.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Q.For FRA84000023E260, what does the specification table state about control method?
The specification table lists control method = V/f, sensorless vector (IEC 61800-2) for Mitsubishi FRA84000023E260. Check the revision of the installed unit if the catalog number has been superseded.
Q.Which value is published under output current for catalog number FRA84000023E260?
For FRA84000023E260, output current is given as 2.3 A. Compare it with the nameplate of the installed unit before ordering.
Q.Before ordering FRA84000023E260, which overload capacity entry should be checked?
The overload capacity entry quoted above is 150 % for 60 s (IEC 61800-2). Confirm this figure against the unit currently in the panel.
Q.Can the FRA84000023E260 replace the unit currently installed in my panel?
Compare catalog number FRA84000023E260 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.How do I confirm compatibility of FRA84000023E260 before ordering?
Match the catalog number FRA84000023E260 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.
Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. The Express surcharge is calculated at checkout based on destination and order weight.
Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.
Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date of delivery, against defects in materials and workmanship under normal use.
This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.
No reviews yet. Be the first to review this product!
