Schneider Electric · Motion Controller
LMC058LF424S0 is a Schneider Electric industrial component with Supply voltage 24 V DC (IEC 61131-2); Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltage24 V DC (IEC 61131-2)
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
Specifications
| Electrical |
| Supply voltage |
24 V DC (IEC 61131-2) |
| Mechanical |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, CSA, CCC, EAC, Marine |
Values follow the Schneider Electric Motion Controller specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Schneider Electric Motion Controller variants |
| Catalog number |
Mounting |
|
LMC058LF424S0 (this page) |
DIN rail / panel |
| LMC058LF424 |
DIN rail / panel |
| LMC058LF42 |
DIN rail / panel |
| LMC058LF42S0 |
DIN rail / panel |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The LMC058LF424S0 is the device-level element in a Schneider Electric industrial component installation. It receives the field signals and control supply listed above — 24 V DC (IEC 61131-2) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Schneider Electric LMC058LF424S0
Schneider Electric LMC058LF424S0 — PLC / CPU module used as the device-level control core in an automation panel, handling logic, timing and communication tasks. The figures below are taken from the specification table on this page for catalog number LMC058LF424S0; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Enclosure rating: IP20 (IEC 60529) — Use it as the reference when cross-checking a current-production equivalent.
- Mounting: DIN rail / panel — Verify it in the project documentation before confirming the order.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Check this value against the nameplate of the installed unit before ordering.
- Certifications: CE, UL, CSA, CCC, EAC, Marine — Match it to the existing panel and upstream protection.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about LMC058LF424S0
Q.For LMC058LF424S0, what does the specification table state about certifications?
The specification table lists certifications = CE, UL, CSA, CCC, EAC, Marine for Schneider Electric LMC058LF424S0. Compare it with the nameplate of the installed unit before ordering.
Q.Which value is published under supply voltage for catalog number LMC058LF424S0?
For LMC058LF424S0, supply voltage is given as 24 V DC (IEC 61131-2). Confirm this figure against the unit currently in the panel.
Q.Before ordering LMC058LF424S0, which enclosure rating entry should be checked?
The enclosure rating entry quoted above is IP20 (IEC 60529). Use the value as the reference when sourcing a current-production equivalent.
Q.What should I include in an enquiry for LMC058LF424S0?
Send the full catalog number LMC058LF424S0, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Schneider Electric LMC058LF424S0.
Q.Can the LMC058LF424S0 replace the unit currently installed in my panel?
Compare catalog number LMC058LF424S0 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.