Couldn't load pickup availability
All industrial automation equipment comes complete with standard matching accessories and detailed step-by-step commissioning manuals. Unbox, install and commission your automation projects smoothly with full confidence.
Got questions?
Feel free to get in touch
Ask an expert!
The Keyence SV2-005L2 is an ac servo drive. The listed technical data shows 7 (3 high-speed input, 4 general input) I/O points, communication via MECHATROLINK-III, based on the manufacturer's datasheet. It is supplied by SHLY-PLC, an independent industrial-automation distributor: every unit is visually inspected and functionally checked before dispatch, held in ready stock and shipped worldwide for maintenance, spares and retrofit use. Share your application or existing part number and our team will confirm fitment and comparable in-stock alternatives.
Technical parameters compiled from the manufacturer data sheet and reference documentation.
| Technical Specifications | |
| Type Designation | |
| Model | SV2-005L2 |
| Overvoltage category | III |
| Structure Type | Attached to base mount |
| Conversion precision | ±20 mV (typ.) |
| Conversion speed | 1.2 ms (typ.) |
| Power Supply | |
| Input power supply Main circuit | 3-phase (or single phase) 200 to 240 VAC +10 to -15%, 50/60 Hz ; 270 to 324 VDC |
| CE marking Low-voltage directive | EN61800-5-1, EN50178 |
| Insulation withstand voltage | 1500 VAC or more (between primary side and ground) ; 3000 VAC or more (between primary side and secondary side) ; 350 VAC: Between secondary circuit and ground |
| Power supply/current capacity and power loss Main circuit power supply | Three-phase 200 V/Single phase 200 V |
| Power supply capacity for 1 amplifier | Three-phase 200 V: 0.2 kVA, Single phase 200 V: 0.2 kVA |
| Main circuit power loss | 5.1 W |
| Regenerative resistor power loss | — |
| Total power loss | 22.1 W |
| At main circuit voltage change | 0% with ±10% of rated voltage (at rated rotation speed) |
| Speed frequency response frequency | 2.6 kHz |
| Rated input voltage | 24 VDC |
| Min. ON voltage | 19 VDC |
| Min. OFF current/voltage | High-speed input: 0.6 mA, general input: 0.3 mA |
| Residual voltage when ON | 1.5 VDC or less |
| Transmission frequency | 125 μs, 250 μs, 500 μs, 750 μs, 1 to 4 ms (in multiples of 0.5 ms) |
| Inputs & Outputs | |
| Output | EDM: Built-in safety circuit status monitoring (fixed output) ; Max. allowable voltage: 30 VDC ; Max. allowable current: 50 mA DC ; Max. voltage drop at ON: 1.5 V ; Max. delay time: 8 ms ; (Time from changing STO1, STO2 until EDM change) |
| Rated input current Main circuit | Three-phase 200 V: 0.4 Arms, Single phase 200 V: 0.8 Arms |
| I/O specifications Number of inputs | 7 (3 high-speed input, 4 general input) |
| Input time constant | 250 μs, 500 μs, 1 ms, 2.5 ms, 5 ms, 10 ms |
| Input impedance | Approx. 4.7 kΩ |
| Assignable input signals | Full signal assignment, logic-settable forced stop (FSTOP), ; external latch signals 1 to 3 (EXT1, EXT2, EXT3), ; origin return deceleration switch (DEC), forward limit switch (LSP), ; reverse limit switch (LSN), forward torque limit selection (PTL), ; reverse torque limit selection (NTL) |
| Command input | MECHATROLINK-III command ; (sequence, motion, monitor, adjustment, etc.) |
| Communication & Interfaces | |
| Communication specifications Communication protocol | MECHATROLINK-III |
| Communication cycle | Support for values starting at transmission frequency × 1 |
| USB communication Connected device | PC |
| Communication standard | USB 2.0-compliant |
| Mechanical | |
| Operating environment Enclosure rating | IP20 |
| Protection function | Overcurrent, overvoltage, undervoltage, overload, regenerative abnormalities, etc. |
| Weight | Approx. 0.8 kg |
| Environmental | |
| Pollution degree | Pollution degree: 2 (in an IP54 or higher control panel) ; However, usage under the following requirements required: ; • No corrosive gas or flammable gas present ; • No exposure to water, oil, or chemicals ; • No dust present |
| Operating ambient temperature | -5 to +60°C 23 to 140°F (no freezing; reduced ratings at +55°C 131°F or more) |
| Storage ambient temperature | -20 to +85°C -4 to +185°F (no freezing) |
| Altitude | 2000 m 6561.7' or less above sea level (usable at reduced ratings at 1000 m 3280.8' or more) |
| Vibration resistance | 4.9 m/s 16.1'/s (JIS C60068-2-6 compliant) |
| At ambient temperature change | ±0.1% or less with ambient temperatures of 0 to +50°C 32 to 122°F (at rated rotation speed) |
| Compliance, Approvals & Standards | |
| Impact resistance | 19.6 m/s 64.3'/s ( JIS C60068-2-27 compliant) |
| Min. insulation resistance | 500 VDC, 1 MΩ or more with insulation resistance tester |
| Applied standard UL/CSA standards | UL61800-5-1, CSA22.2 No.274 |
| Performance specifications Speed control range | 1:5000 (load torque ≤ rated torque conditions) |
| Other | |
| General specifications Capacity | 50 W |
| Control circuit | Single-phase 200 to 240 VAC +10 to -15%, 50/60 Hz ; 270 to 324 VDC |
| Control mode | Three-phase full-wave rectification, IGBT, PWM control, sine-wave current driving method |
| Feedback | 22-bit serial encoder (absolute) communication, ; fully closed control serial communication, analog feedback |
| Other | No static electricity noise, strong electric fields, magnetic fields, or radiation present |
| EMI | EN55011 Class A, EN61800-3, EN61000-6-4 |
| EMS | EN61800-3, EN61000-6-2 |
| Safety function | STO function (STO/EN61800-5-2) |
| Response time | 8 ms (max.) |
| Max. | 2.1 Arms |
| Rush current Main circuit | 34 A |
| Speed fluctuation rate At load fluctuation | ±0.01% or less with load fluctuations of 0 to 100% (at rated rotation speed) |
| Torque control accuracy (reproducibility) | ±1% |
| Dynamic brake | Operated at main circuit power supply OFF, servo alarm, limit switch detection (LSP/LSN), forced stop detection (FSTOP) |
| Display Function Panel function | 7-segment LED ; Rotary switch ×2 (16 ch) ; Slide switch ×1 (4 ch) |
| Status display LED | CHARGE: For notification of main circuit power supply input (orange) ; POWER: For notification of control circuit power supply input (green) ; CONNECT: For notification of connection (green) ; LINK1, LINK2: For notification of MECHATROLINK communication (green) |
| Auxiliary function | Gain control, alarm history, Z-phase search, etc. |
| Common point mode | 7 points/1 common point (1 terminal) (bidirectional) |
| Rated load | 30 VDC / 50 mA |
| Leakage current when OFF | 0.1 mA |
| Resolution | ±10 bits |
| Line driver | SN75ALS174 (T.I.) or equivalent |
| Station address | 03H to EFH (Max. number of connectable slaves: 62) |
| Transmission speed | 100 Mbps |
| Number of transmitted bytes | 32 bytes/station, 48 bytes/station (selectable with slide switch) |
| Transmission media/cable | Category 5e-compliant, STP cross cable |
| Operating specifications | Position control / speed control / torque control |
Model variants, options and firmware revisions can affect fitment. Before ordering the Keyence SV2-005L2 ac servo drive, share your existing part number or project requirements and our team will cross-reference comparable in-stock Keyence units and verify compatibility. This listing is provided by an independent industrial-automation distributor; brand names and part numbers are used for identification only.
A: Each SV2-005L2 is inspected and functionally checked before sale. Contact us for the current stock condition and quantity.
A: In-stock orders placed before 14:00 ship the same business day. Standard worldwide delivery is about 5-8 business days, express shipping is available and orders over $500 ship free.
A: Yes. Share your existing part number or application and our technical team will verify compatibility and provide cross-references to comparable in-stock models.
SV2-005L2 · Technical reference data · Independently supplied by SHLY-PLC
Place your order before 14:00 for earliest possible shipment handover. With round-the-clock transit operated by our partnered global logistics providers, parcels reach most international destinations following routine customs processing. Economy shipping takes 5–8 business days, while express delivery arrives in 5–8 business days, both subject to customs clearance progress.Shipping fees will be charged for all orders under USD 500, and the exact shipping cost will be determined and collected by our logistics carriers. Shipments to remote international regions will incur additional courier surcharges to offset extra cross-border transportation costs.
Factory warranty service is not applicable to this industrial control equipment, and extended warranty packages are not provided for this item.
No reviews yet. Be the first to review this product!
