Couldn't load pickup availability
All industrial automation equipment comes complete with standard matching accessories and detailed step-by-step commissioning manuals. Unbox, install and commission your automation projects smoothly with full confidence.
Got questions?
Feel free to get in touch
Ask an expert!
The Keyence CV-3002 is a machine vision system. The listed technical data shows communication via Numerical value output, image data (compressible) and control input/output enabled. Can be used simultaneously with other communication ports.100BASE-TX/10BASE-T, based on the manufacturer's datasheet. It is supplied by SHLY-PLC, an independent industrial-automation distributor: every unit is visually inspected and functionally checked before dispatch, held in ready stock and shipped worldwide for maintenance, spares and retrofit use. Share your application or existing part number and our team will confirm fitment and comparable in-stock alternatives.
Technical parameters compiled from the manufacturer data sheet and reference documentation.
| Technical Specifications | |
| Type Designation | |
| Model | CV-3002 |
| Type | Expand, shrink, average, median, edge sharpening, edge extract X, edge extract Y, Sobel, Prewitt,Roberts, Laplacian, binary, subtract, illumination adjustment, contrast conversion, image extraction |
| Coordinateconversion function. | Coordinate system conversion, rotating matrix |
| Power Supply | |
| Rating Power voltage | 24 VDC ±10 % |
| Current consumption | 1.4 A (2 cameras at maximum load) |
| Inputs & Outputs | |
| Camera input | Two color/monochrome cameras (CV-035C/S035C/035M/S035M can beconnected. Mixed connection ispossible.) |
| Support Functions No. of data | Max. 20000 data (can be saved into a memory card in a batch) |
| Support functions Custom menu function | Shortcut menu to a desired program screen can be created (20 menus/program). |
| Support Functions Others | Screen capture function, password function, re-test function, file managementfunction, I/O monitoring, RS-232C monitoring (with log save function) |
| Interface External trigger input | 2-camera simultaneous capture/individual capture can be selected. |
| Control input | 18 inputs ; Input rating 26.4 V or less, 2 mA or more |
| Control output Universal output | 27 outputs NPN (including two FLASH outputs linked to external trigger.) |
| Total comparator output | 1 output, NPN open collector, maximum 50 mA (30 V or less) |
| Monitor output | SVGA 800x600 (24-bit color 60 Hz) |
| Communication & Interfaces | |
| Number of screens that can be registered | Maximum 1000 screen for each program (depending on the capacity of theinternal memory and memory card)Compression save function. |
| Internal memory capacity ; (Max. number of settings that can be registered, for reference) | About 15 MB (550 settings) |
| Scan mode switching function (valid only when a monochrome camera is connected) | Progressive/interlace selectable |
| No. of screens that can be ; displayed simultaneously | Max. 5 screens can be displayed at the same time (when 5 scr. (HORIZONTAL)/5 scr. (VERTICAL) is selected). |
| RS-232C | Numerical value output, image data (compressible) and control input/output enabled.Can be used simultaneously with other communication ports.Maximum baud rate of 115200 bps is supported. |
| Ethernet | Numerical value output, image data (compressible) and control input/output enabled.Can be used simultaneously with other communication ports.100BASE-TX/10BASE-T |
| USB | Numerical value output, image data (compressible) and control input/output enabled.Can be used simultaneously with other communication ports.USB2.0, HI-SPEED supported |
| Mechanical | |
| Trend edge width | Shapes are rectangle, rotated rectangle, ring and arc. |
| Weight | Approx. 950 g |
| Environmental | |
| Environmental resistance Ambient temperature | 0 to +50 °C 32 to 122 °F |
| Relative humidity | 35 to 85 % RH (No condensation) |
| Compliance, Approvals & Standards | |
| White balance adjustment (valid only when a color camera is connected) | Manual setting using white paper |
| Calculation function Number of settings | 128 calculations/1 program |
| Geometriccalculation | Distance between 2 points, angle of line segment, circle radius, circle center,average angle, straight line, cross point, distance between a point and a straight line,straight line angle, angle between the two crossed lines, perpendicular line betweena point to a line, perpendicular bisector , midpoint |
| Other | |
| No. of pixels | 512 (H) x 480 (V),approx. 240,000 pixels |
| No. of registered settings | Maximum 1000 programs each in the system and memory card (depending on the memory capacity and program data), externally selectable. |
| Window setting Measurement area | 128 windows/1 program |
| Mask area | 4 mask windows/1 inspection window |
| Color extraction function (valid only when a color camera is connected) | Color binary processing, color shade processing, gray scale processing (colors can be numerically specified with HSB or RGB values.) |
| Measurement tool Area measurement | Shapes are rectangle, rotated rectangle, circle, oval, ring, arc, polygon (up to 12 sides),auto-adjusting rectangle, and auto-adjusting circle |
| Position detection Pattern search | • Multiple search possible ; • For both pattern area and search area, the shapes are rectangle, rotatedrectangle, circle, oval, ring, arc, and polygon (up to 12 sides) ; • Pattern area can be masked (4 positions/1 area). |
| V-search | • Simultaneous classification search through up to 256 patterns possible ; • For both pattern area and search area, the shapes are rectangle, rotatedrectangle, circle, oval, ring, arc, and polygon (up to 12 sides) ; • Pattern area can be masked (4 positions/1 area) |
| Edge position | • Angles can be measured. ; • Shapes are rectangle, rotated rectangle, circle, oval, ring, arc, polygon (up to 12 sides),auto-adjusting rectangle, and auto-adjusting circle |
| Inspection mode | Edge position |
| Edge angle | Shape is rectangle. |
| Blob (characteristicquantities) | • Number of blobs, center of gravity, main axis angle, area, feret diameter,perimeter, roundness. ; • Shapes are rectangle, rotated rectangle, circle, oval, ring, arc, polygon (up to 12 sides), auto-adjusting rectangle, and auto-adjusting circle |
| Stain detection | • Subtract stain detection by using subtract filter ; • Stain grouping function supporting multiple stain detection and positionmeasurement. ; • Shapes are rectangle, rotated rectangle, circle, oval, ring, arc, polygon (up to 12 sides), auto-adjusting rectangle, and auto-adjusting circle |
| Color (only when acolor camerais connected) | • RGB and HSV measurement supported ; • Shapes are rectangle, rotated rectangle, circle, oval, ring, arc, and polygon (up to 12 sides) |
| Geometry | • Calculation result can be reflected. ; • Shapes are point, line, and circle. |
| OCR | • Character recognition for max. 2 lines of 20 characters per line ; • Shape is rectangle |
| Continuous capture function | • 1 to 32-time multi-measurement (maximum, minimum and average values) ; • Error values can be excluded from the measurement result. |
| Execution condition setting function | Can set whether to execute the results (OK/NG) for other measurement andcalculation windows in each measurement window. |
| Image capturing ; setting function Processing area setting function | The applicable 240,000 pixels (512 (H) x480 (V)) can be captured from 320,000pixels. |
| Capturing start/end line setting function | Desired capture start/end line can be set within the image capture range. (Two lines are counted as one unit with the interlace method.) |
| Correction ; functions Position adjustment | Batch, individual (maximum 64 settings), X, Y, ±180° rotation. |
| Camera gain adjustment | Sensitivity adjustment, offset, and span adjustment (RGB batch/individual and span can be set for each of 16 brightness levels. RGBindividual setting can be supported when color camera is conencted.) |
| Filter function Count | The same type of filter can be used up to 9 times. 13 steps. (For binarization and subtract only : 1 step/window) |
| Scaling | X and Y calibration setting for each camera. Conversion from measurement valuesand calculation values is supported. |
| Arithmetic operation | Sum (+), subtract (-), multiply (x), divide (÷) |
| Arithmeticfunction | Square, exponential, counting fractions as one, round-off fractions, maximum, minimum, average, average within range,square root, absolute value, remainder, distance, angle, sin, cos, tan, asin, acos, atan, π |
| Comparative operator | ＜, ==, Not |
| Logical operator | AND, OR, NOT, XOR |
| Sort function | Maximum value index output, minimum value index output |
| System function | Number of measurement times, measurement time, year, month, day, time, minute, second |
| Time axis operationfunction | Previous measurement result acquisition operator |
| Command memory | Equipped with 128 command memory entries that can be rewritten from an external device and from the console during operation |
| Statistical item | Maximum, minimum, average value, deviation (3σ), total status OK/NG times |
| Screen save (valid when monochrome ; and color cameras are connected) | The following number of screens can besaved in the systemís memory : ; • Maximum 511 images (when using amonochrome camera) ; • Maximum 169 images (when using acolor camera) (These are the maximum values withonly one camera connected, and[Condition] set to [All Images].) |
| programming aid functions Screen Magnification | Between 4% and 1600% during setting or operation (6% and 2500% during fullscreen display) (Size can be set for each screen while diplaying multiple screens.) |
| Edge WaveformDisplay | Edge waveform can be graphically displayed during setting or operation, and edgeintensity and measurement values (some are not supported) can be displayed duringsetting. |
| Profile Display | Trend edge position and gap can be graphically displayed during setting oroperation. |
| Stability display | Stain detection (stain level) is displayed during setting or operation. |
| Shift all windows | Selected windows from an identical camera or an identical registered image can beshifted in the desired XY direction in a group. |
| Display templates setting ; function No. of display | 10 templates/1 program (within which 4 templates are specified values), externallyselectable |
| Hold image | Up to the past three images (NG images) can be displayed as hold images.measurement results and measurement time can be viewed. (The number of displayable times varies between 0 and 3 depending on camera'sconnection state.) |
| Screen customization function No. of customization screens | 10 screens/1 program |
| Custom item | Character string : Measurement value (decimal point can be specified), result, customcharacter, graphics, active text |
| Measurementresult interlink | • Display color can be changed according to the result for figures and customcharacters. ; • Can set a message in the allocation table that relates to the measurementvalue (active text) |
| Operation rewrite function | Upper/lower tolerance or command memory can be rewritten during opration. |
| Memory card save function | • Measurement value, judgment result, NG count, measurement image (compressible), stored image (compressible), captured image, statistics analysisdata, RS-232C communication log, program data• Can save data during test run (except for program data). |
| PLC link | Numerical value output and control input/output using the RS-232C port orEthernet port enabled.Following PLCs are supported via link unit : • KEYKENCE CORP. : KV-700 series, KV-1000 series• Mitsubishi Electric : A series (RS-232C only), Q series• OMRON : SYSMAC C series (RS-232C only), CJ/CJ1 series |
| Display language | Japanese/English/German selectable |
Model variants, options and firmware revisions can affect fitment. Before ordering the Keyence CV-3002 machine vision system, share your existing part number or project requirements and our team will cross-reference comparable in-stock Keyence units and verify compatibility. This listing is provided by an independent industrial-automation distributor; brand names and part numbers are used for identification only.
A: Each CV-3002 is inspected and functionally checked before sale. Contact us for the current stock condition and quantity.
A: In-stock orders placed before 14:00 ship the same business day. Standard worldwide delivery is about 5-8 business days, express shipping is available and orders over $500 ship free.
A: Yes. Share your existing part number or application and our technical team will verify compatibility and provide cross-references to comparable in-stock models.
CV-3002 · Technical reference data · Independently supplied by SHLY-PLC
Place your order before 14:00 for earliest possible shipment handover. With round-the-clock transit operated by our partnered global logistics providers, parcels reach most international destinations following routine customs processing. Economy shipping takes 5–8 business days, while express delivery arrives in 5–8 business days, both subject to customs clearance progress.Shipping fees will be charged for all orders under USD 500, and the exact shipping cost will be determined and collected by our logistics carriers. Shipments to remote international regions will incur additional courier surcharges to offset extra cross-border transportation costs.
Factory warranty service is not applicable to this industrial control equipment, and extended warranty packages are not provided for this item.
No reviews yet. Be the first to review this product!
