IFM · Inductive proximity sensor
II0297 is an IFM circuit breaker with Breaking capacity Icu/Ics no; Supply voltage 10...30 V DC (IEC 60947-5-2); Enclosure rating IP67 (IEC 60529). It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Breaking capacity Icu/Icsno
-
Supply voltage10...30 V DC (IEC 60947-5-2)
-
Enclosure ratingIP67 (IEC 60529)
-
Operating temperature-25...+70 °C (IEC 60068-2-1)
Specifications
| Electrical |
| Breaking capacity Icu/Ics |
no |
| Supply voltage |
10...30 V DC (IEC 60947-5-2) |
| Frequency |
25 Hz |
| Overload capacity |
no |
| I/O and communication |
| Response time |
<= 1500 Hz switching frequency |
| Mechanical |
| Dimensions (H x W x D) |
M30 x 1.5 mm |
| Weight |
164.5 g |
| Enclosure rating |
IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+70 °C (IEC 60068-2-1) |
| Certifications |
CE, cULus |
Values follow the IFM Inductive proximity sensor specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| IFM Inductive proximity sensor variants |
| Catalog number |
Breaking capacity Icu/Ics |
|
II0297 (this page) |
no |
| II0340 |
no |
| II502A |
yes |
| II503A |
yes |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The II0297 is the device-level element in an IFM circuit breaker installation. It receives the field signals and control supply listed above — 10...30 V DC (IEC 60947-5-2) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides standard panel or DIN-rail support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for IFM II0297
IFM II0297 — Sensor or detector for object detection, distance measurement and status feedback on production lines. The figures below are taken from the specification table on this page for catalog number II0297; verify the catalog number against your bill of materials before requesting a quotation.
- Weight: 164.5 g — Confirm the revision of the installed unit before a like-for-like replacement.
- Enclosure rating: IP67 (IEC 60529) — Use it as the reference when cross-checking a current-production equivalent.
- Overload capacity: no — Verify it in the project documentation before confirming the order.
- Supply voltage: 10...30 V DC (IEC 60947-5-2) — Check this value against the nameplate of the installed unit before ordering.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about II0297
Q.Before ordering II0297, which overload capacity entry should be checked?
The overload capacity entry quoted above is no. Use the value as the reference when sourcing a current-production equivalent.
Q.Where can I find the dimensions (H x W x D) data for II0297?
It is listed in the specification table for IFM II0297 as M30 x 1.5 mm. Check the revision of the installed unit if the catalog number has been superseded.
Q.For II0297, what does the specification table state about breaking capacity Icu/Ics?
The specification table lists breaking capacity Icu/Ics = no for IFM II0297. Compare it with the nameplate of the installed unit before ordering.
Q.Can the II0297 replace the unit currently installed in my panel?
Compare catalog number II0297 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.What should I include in an enquiry for II0297?
Send the full catalog number II0297, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for IFM II0297.