IFM · circuit breaker
AC1254 is an IFM circuit breaker with Breaking capacity Icu/Ics yes; Supply voltage automatic range selection (IEC 61131-2); Enclosure rating IP 20 (IEC 60529). It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Breaking capacity Icu/Icsyes
-
Supply voltageautomatic range selection (IEC 61131-2)
-
Enclosure ratingIP 20 (IEC 60529)
-
Mounting35 mm DIN rail (IEC 60715)
Specifications
| Electrical |
| Breaking capacity Icu/Ics |
yes |
| Supply voltage |
automatic range selection (IEC 61131-2) |
| Output current |
4 A |
| Overload capacity |
yes |
| Mechanical |
| Dimensions (H x W x D) |
124 x 40 x 120 mm |
| Weight |
625.5 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Enclosure rating |
IP 20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...70 °C (IEC 60068-2-1) |
| Storage temperature |
-40...85 °C |
| Certifications |
CE, cULus |
Values follow the IFM circuit breaker specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| IFM circuit breaker variants |
| Catalog number |
Breaking capacity Icu/Ics |
|
AC1254 (this page) |
yes |
| AC1250 |
yes |
| AC009S |
yes |
| AC010S |
no |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The AC1254 is the device-level element in an IFM circuit breaker installation. It receives the field signals and control supply listed above — automatic range selection (IEC 61131-2) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for IFM AC1254
IFM AC1254 — PLC / CPU module used as the device-level control core in an automation panel, handling logic, timing and communication tasks. The figures below are taken from the specification table on this page for catalog number AC1254; confirm the installed unit's part number and revision so the replacement matches both electrically and mechanically.
- Weight: 625.5 g — Match it to the existing panel and upstream protection.
- Enclosure rating: IP20 (IEC 60529) — Record it with the other nameplate data when sourcing a replacement.
- Operating temperature: -25...70 °C (IEC 60068-2-1) — Confirm the revision of the installed unit before a like-for-like replacement.
- Dimensions (H x W x D): 124 x 40 x 120 mm — Use it as the reference when cross-checking a current-production equivalent.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about AC1254
Q.Which value is published under dimensions (H x W x D) for catalog number AC1254?
For AC1254, dimensions (H x W x D) is given as 124 x 40 x 120 mm. Confirm this figure against the unit currently in the panel.
Q.Before ordering AC1254, which mounting entry should be checked?
The mounting entry quoted above is 35 mm DIN rail (IEC 60715). Use the value as the reference when sourcing a current-production equivalent.
Q.Where can I find the breaking capacity Icu/Ics data for AC1254?
It is listed in the specification table for IFM AC1254 as yes. Check the revision of the installed unit if the catalog number has been superseded.
Q.How do I confirm compatibility of AC1254 before ordering?
Match the catalog number AC1254 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.What should I include in an enquiry for AC1254?
Send the full catalog number AC1254, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for IFM AC1254.