Honeywell · HMI panel
STR83D-21CS1E0-BDYBA400K-A-CD0-11S-A-61A6-00-0000 is a Honeywell HMI panel with Supply voltage DE: 15 to 49.3 VDC; FF: 9 to 32 VDC; HART: 10.8 to 42.4 VDC; Enclosure rating Electronic Housing: Polyester Powder-Coated Aluminum (<0.4% Cu), Optional 316/316L Stainless Steel, IP66/IP67; Communication ports RS-232/422/485, Ethernet. It is used in machine operator panels, control cabinets, local HMI stations where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltageDE: 15 to 49.3 VDC; FF: 9 to 32 VDC; HART: 10.8 to 42.4 VDC
-
Enclosure ratingElectronic Housing: Polyester Powder-Coated Aluminum (<0.4% Cu), Optional 316/316L Stainless Steel, IP66/IP67
-
MountingPending confirmation from the official Honeywell data sheet
Specifications
| Electrical |
| Supply voltage |
DE: 15 to 49.3 VDC; FF: 9 to 32 VDC; HART: 10.8 to 42.4 VDC |
| Mechanical |
| Mounting |
Pending confirmation from the official Honeywell data sheet |
| Enclosure rating |
Electronic Housing: Polyester Powder-Coated Aluminum (<0.4% Cu), Optional 316/316L Stainless Steel, IP66/IP67 |
| Touch type |
Pending confirmation from the official Honeywell data sheet |
| Environment and compliance |
| Operating temperature |
-55 to +90 deg C (-67 deg F to 194 deg F) |
| Certifications |
Pending confirmation from the official Honeywell data sheet |
Values follow the Honeywell HMI panel specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The STR83D-21CS1E0-BDYBA400K-A-CD0-11S-A-61A6-00-0000 is the device-level element in a Honeywell HMI panel installation. It receives the field signals and control supply listed above — Pending confirmation from the official Honeywell data sheet — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in machine operator panels, control cabinets, local HMI stations, where the unit is matched to the original catalog number and the enclosure provides Pending confirmation from the official Honeywell data sheet support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Honeywell STR83D-21CS1E0-BDYBA400K-A-CD0-11S-A-61A6-00-0000
Honeywell STR83D-21CS1E0-BDYBA400K-A-CD0-11S-A-61A6-00-0000 — Operator panel for visualisation, parameter setting and alarm handling on a control cabinet door or console. The figures below are taken from the specification table on this page for catalog number STR83D-21CS1E0-BDYBA400K-A-CD0-11S-A-61A6-00-0000; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Mounting: Pending confirmation from the official Honeywell data sheet — Record it with the other nameplate data when sourcing a replacement.
- Touch type: Pending confirmation from the official Honeywell data sheet — Confirm the revision of the installed unit before a like-for-like replacement.
- Enclosure rating: Electronic Housing: Polyester Powder-Coated Aluminum (<0.4% Cu), Optional 316/316L Stainless Steel, IP66/IP67 — Use it as the reference when cross-checking a current-production equivalent.
- Operating temperature: -55 to +90 deg C (-67 deg F to 194 deg F) — Verify it in the project documentation before confirming the order.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about STR83D-21CS1E0-BDYBA400K-A-CD0-11S-A-61A6-00-0000
Q.Which value is published under certifications for catalog number STR83D-21CS1E0-BDYBA400K-A-CD0-11S-A-61A6-00-0000?
For STR83D-21CS1E0-BDYBA400K-A-CD0-11S-A-61A6-00-0000, certifications is given as Pending confirmation from the official Honeywell data sheet. Check the revision of the installed unit if the catalog number has been superseded.
Q.Before ordering STR83D-21CS1E0-BDYBA400K-A-CD0-11S-A-61A6-00-0000, which touch type entry should be checked?
The touch type entry quoted above is Pending confirmation from the official Honeywell data sheet. Compare it with the nameplate of the installed unit before ordering.
Q.Where can I find the enclosure rating data for STR83D-21CS1E0-BDYBA400K-A-CD0-11S-A-61A6-00-0000?
It is listed in the specification table for Honeywell STR83D-21CS1E0-BDYBA400K-A-CD0-11S-A-61A6-00-0000 as Pending confirmation from the official Honeywell data sheet. Confirm this figure against the unit currently in the panel.
Q.What should I include in an enquiry for STR83D-21CS1E0-BDYBA400K-A-CD0-11S-A-61A6-00-0000?
Send the full catalog number STR83D-21CS1E0-BDYBA400K-A-CD0-11S-A-61A6-00-0000, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Honeywell STR83D-21CS1E0-BDYBA400K-A-CD0-11S-A-61A6-00-0000.
Q.Can the STR83D-21CS1E0-BDYBA400K-A-CD0-11S-A-61A6-00-0000 replace the unit currently installed in my panel?
Compare catalog number STR83D-21CS1E0-BDYBA400K-A-CD0-11S-A-61A6-00-0000 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.