Honeywell · HMI panel
STD725-E1HK2AS-1-A-AHT-11S-A-30A6-FX-F3-TP-PM-0000 is a Honeywell HMI panel with Supply voltage 10.8 to 42.4 VDC at terminals (IS versions limited to 30 VDC); Enclosure rating Meets Type 4X / IP66 / IP67. All stainless-steel housing is optional.; Communication ports RS-232/422/485, Ethernet. It is used in machine operator panels, control cabinets, local HMI stations where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltage10.8 to 42.4 VDC at terminals (IS versions limited to 30 VDC)
-
Enclosure ratingMeets Type 4X / IP66 / IP67. All stainless-steel housing is optional.
-
Mounting2” Pipe, Carbon Steel (Zinc-plated), 304 Stainless Steel or 316 Stainless Steel
Specifications
| Electrical |
| Supply voltage |
10.8 to 42.4 VDC at terminals (IS versions limited to 30 VDC) |
| I/O and communication |
| Response time |
Pending confirmation from the official Honeywell data sheet |
| Mechanical |
| Mounting |
2” Pipe, Carbon Steel (Zinc-plated), 304 Stainless Steel or 316 Stainless Steel |
| Enclosure rating |
Meets Type 4X / IP66 / IP67. All stainless-steel housing is optional. |
| Touch type |
Pending confirmation from the official Honeywell data sheet |
| Environment and compliance |
| Operating temperature |
-40 to 85 °C (Rated Condition and Operative Limits); -55 to 120 °C (Transportation and Storage) |
| Certifications |
Pending confirmation from the official Honeywell data sheet |
Values follow the Honeywell HMI panel specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Honeywell HMI panel variants |
| Catalog number |
Supply voltage |
|
STD725-E1HK2AS-1-A-AHT-11S-A-30A6-FX-F3-TP-PM-0000 (this page) |
Pending confirmation from the official Honeywell data sheet |
| STD730-E1HS6AS-1-A-AHC-11S-A-60A6-TP-0000 |
Pending confirmation from the official Honeywell data sheet |
| STD120-E1H |
Pending confirmation from the official Honeywell data sheet |
| STD120-E1H-00000-1C-S2 |
Pending confirmation from the official Honeywell data sheet |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The STD725-E1HK2AS-1-A-AHT-11S-A-30A6-FX-F3-TP-PM-0000 is the device-level element in a Honeywell HMI panel installation. It receives the field signals and control supply listed above — Pending confirmation from the official Honeywell data sheet — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in machine operator panels, control cabinets, local HMI stations, where the unit is matched to the original catalog number and the enclosure provides Pending confirmation from the official Honeywell data sheet support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Honeywell STD725-E1HK2AS-1-A-AHT-11S-A-30A6-FX-F3-TP-PM-0000
Honeywell STD725-E1HK2AS-1-A-AHT-11S-A-30A6-FX-F3-TP-PM-0000 — Operator panel for visualisation, parameter setting and alarm handling on a control cabinet door or console. The figures below are taken from the specification table on this page for catalog number STD725-E1HK2AS-1-A-AHT-11S-A-30A6-FX-F3-TP-PM-0000; record the nameplate data of the unit being replaced before selecting an equivalent.
- Operating temperature: -40 to 85 °C (Rated Condition and Operative Limits); -55 to 120 °C (Transportation and Storage) — Match it to the existing panel and upstream protection.
- Response time: Pending confirmation from the official Honeywell data sheet — Record it with the other nameplate data when sourcing a replacement.
- Touch type: Pending confirmation from the official Honeywell data sheet — Confirm the revision of the installed unit before a like-for-like replacement.
- Mounting: 2” Pipe, Carbon Steel (Zinc-plated), 304 Stainless Steel or 316 Stainless Steel — Use it as the reference when cross-checking a current-production equivalent.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about STD725-E1HK2AS-1-A-AHT-11S-A-30A6-FX-F3-TP-PM-0000
Q.For STD725-E1HK2AS-1-A-AHT-11S-A-30A6-FX-F3-TP-PM-0000, what does the specification table state about touch type?
The specification table lists touch type = Pending confirmation from the official Honeywell data sheet for Honeywell STD725-E1HK2AS-1-A-AHT-11S-A-30A6-FX-F3-TP-PM-0000. Check the revision of the installed unit if the catalog number has been superseded.
Q.Which value is published under operating temperature for catalog number STD725-E1HK2AS-1-A-AHT-11S-A-30A6-FX-F3-TP-PM-0000?
For STD725-E1HK2AS-1-A-AHT-11S-A-30A6-FX-F3-TP-PM-0000, operating temperature is given as Pending confirmation from the official Honeywell data sheet. Compare it with the nameplate of the installed unit before ordering.
Q.Before ordering STD725-E1HK2AS-1-A-AHT-11S-A-30A6-FX-F3-TP-PM-0000, which supply voltage entry should be checked?
The supply voltage entry quoted above is Pending confirmation from the official Honeywell data sheet. Confirm this figure against the unit currently in the panel.
Q.What should I include in an enquiry for STD725-E1HK2AS-1-A-AHT-11S-A-30A6-FX-F3-TP-PM-0000?
Send the full catalog number STD725-E1HK2AS-1-A-AHT-11S-A-30A6-FX-F3-TP-PM-0000, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Honeywell STD725-E1HK2AS-1-A-AHT-11S-A-30A6-FX-F3-TP-PM-0000.
Q.How do I confirm compatibility of STD725-E1HK2AS-1-A-AHT-11S-A-30A6-FX-F3-TP-PM-0000 before ordering?
Match the catalog number STD725-E1HK2AS-1-A-AHT-11S-A-30A6-FX-F3-TP-PM-0000 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.