Honeywell · Safety I/O module
FCIOTAR24 is a Honeywell industrial component with Supply voltage 24 V DC (IEC 61131-2); Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltage24 V DC (IEC 61131-2)
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
Specifications
| Electrical |
| Supply voltage |
24 V DC (IEC 61131-2) |
| I/O and communication |
| Response time |
< 1 ms |
| Mechanical |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, cULus |
Values follow the Honeywell Safety I/O module specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Honeywell Safety I/O module variants |
| Catalog number |
Mounting |
|
FCIOTAR24 (this page) |
DIN rail / panel |
| FCIO0001 |
DIN rail / panel |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The FCIOTAR24 is the device-level element in a Honeywell industrial component installation. It receives the field signals and control supply listed above — 24 V DC (IEC 61131-2) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Honeywell FCIOTAR24
Honeywell FCIOTAR24 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number FCIOTAR24; always cross-check the catalog number and hardware revision on the nameplate before placing an order.
- Supply voltage: 24 V DC (IEC 61131-2) — Confirm the revision of the installed unit before a like-for-like replacement.
- Mounting: DIN rail / panel — Use it as the reference when cross-checking a current-production equivalent.
- Enclosure rating: IP20 (IEC 60529) — Verify it in the project documentation before confirming the order.
- Response time: < 1 ms — Check this value against the nameplate of the installed unit before ordering.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about FCIOTAR24
Q.Before ordering FCIOTAR24, which enclosure rating entry should be checked?
The enclosure rating entry quoted above is IP20 (IEC 60529). Compare it with the nameplate of the installed unit before ordering.
Q.Where can I find the operating temperature data for FCIOTAR24?
It is listed in the specification table for Honeywell FCIOTAR24 as 0...+55 °C (IEC 60068-2-1). Confirm this figure against the unit currently in the panel.
Q.For FCIOTAR24, what does the specification table state about certifications?
The specification table lists certifications = CE, cULus for Honeywell FCIOTAR24. Use the value as the reference when sourcing a current-production equivalent.
Q.Can the FCIOTAR24 replace the unit currently installed in my panel?
Compare catalog number FCIOTAR24 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.What should I include in an enquiry for FCIOTAR24?
Send the full catalog number FCIOTAR24, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Honeywell FCIOTAR24.