Honeywell · HMI panel
900CR1500 is a Honeywell HMI panel with Screen size Pending confirmation from the official Honeywell data sheet; Supply voltage 10 to 30 VDC, Class 2 source.; Enclosure rating Type 4X Indoor / IP66 Enclosure rating (Face only). It is used in machine operator panels, control cabinets, local HMI stations where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Screen sizePending confirmation from the official Honeywell data sheet
-
Supply voltage10 to 30 VDC, Class 2 source.
-
Enclosure ratingType 4X Indoor / IP66 Enclosure rating (Face only)
Specifications
| Electrical |
| Supply voltage |
10 to 30 VDC, Class 2 source. |
| I/O and communication |
| Screen size |
Pending confirmation from the official Honeywell data sheet |
| Mechanical |
| Weight |
5.17 kg (11.41 lbs) |
| Mounting |
Maximum panel thickness is 0.25" (6.35 mm) with included stiffener plate, or 0.375" (9.53 mm) without plate. For NEMA 4X / IP66 sealing, the stiffener plate and a panel with a minimum thickness of 0.06" (1.52 mm) is recommended. |
| Enclosure rating |
Type 4X Indoor / IP66 Enclosure rating (Face only) |
| Backlight life |
50,000 h typical, field replaceable |
| Touch type |
Pending confirmation from the official Honeywell data sheet |
| Environment and compliance |
| Operating temperature |
-10 to 50 °C |
| Certifications |
Pending confirmation from the official Honeywell data sheet |
Values follow the Honeywell HMI panel specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Honeywell HMI panel variants |
| Catalog number |
Screen size |
Supply voltage |
|
900CR1500 (this page) |
Pending confirmation from the official Honeywell data sheet |
Pending confirmation from the official Honeywell data sheet |
| 900CR10-00 |
Pending confirmation from the official Honeywell data sheet |
Pending confirmation from the official Honeywell data sheet |
| SP3000-WR |
— |
Pending confirmation from the official Honeywell data sheet |
| SPS-R360D-NBMS0101 |
— |
Pending confirmation from the official Honeywell data sheet |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 900CR1500 is the device-level element in a Honeywell HMI panel installation. It receives the field signals and control supply listed above — Pending confirmation from the official Honeywell data sheet — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in machine operator panels, control cabinets, local HMI stations, where the unit is matched to the original catalog number and the enclosure provides Pending confirmation from the official Honeywell data sheet support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Honeywell 900CR1500
Honeywell 900CR1500 — Operator panel for visualisation, parameter setting and alarm handling on a control cabinet door or console. The figures below are taken from the specification table on this page for catalog number 900CR1500; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Enclosure rating: Type 4X Indoor / IP66 Enclosure rating (Face only) — Match it to the existing panel and upstream protection.
- Backlight life: 50,000 h typical, field replaceable — Record it with the other nameplate data when sourcing a replacement.
- Touch type: Pending confirmation from the official Honeywell data sheet — Confirm the revision of the installed unit before a like-for-like replacement.
- Operating temperature: -10 to 50 °C — Use it as the reference when cross-checking a current-production equivalent.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about 900CR1500
Q.Before ordering 900CR1500, which screen size entry should be checked?
The screen size entry quoted above is Pending confirmation from the official Honeywell data sheet. Use the value as the reference when sourcing a current-production equivalent.
Q.Where can I find the enclosure rating data for 900CR1500?
It is listed in the specification table for Honeywell 900CR1500 as Pending confirmation from the official Honeywell data sheet. Check the revision of the installed unit if the catalog number has been superseded.
Q.For 900CR1500, what does the specification table state about weight?
The specification table lists weight = 5.17 kg (11.41 lbs) for Honeywell 900CR1500. Compare it with the nameplate of the installed unit before ordering.
Q.What should I include in an enquiry for 900CR1500?
Send the full catalog number 900CR1500, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Honeywell 900CR1500.
Q.How do I confirm compatibility of 900CR1500 before ordering?
Match the catalog number 900CR1500 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.