Honeywell · PLC controller
900C72R-0000-41 is a Honeywell PLC controller with Total I/O Up to 4608 with remote I/O; Supply voltage 24 V DC (IEC 61131-2); Enclosure rating IP20 (IEC 60529). It is used in packaging machines, conveyor transfer cells, small process skids where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Total I/OUp to 4608 with remote I/O
-
Supply voltage24 V DC (IEC 61131-2)
-
Enclosure ratingIP20 (IEC 60529)
-
Communication ports2 Ethernet ports (dual), 10/100 Mbps
Specifications
| Electrical |
| Supply voltage |
24 V DC (IEC 61131-2) |
| I/O and communication |
| Communication ports |
2 Ethernet ports (dual), 10/100 Mbps |
| Total I/O |
Up to 4608 with remote I/O |
| Mechanical |
| Dimensions (H x W x D) |
137 mm x 38.1 mm (5.4 in x 1.5 in) |
| Weight |
400 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, cULus |
Values follow the Honeywell PLC controller specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Honeywell PLC controller variants |
| Catalog number |
Total I/O |
Supply voltage |
|
900C72R-0000-41 (this page) |
Up to 4608 with remote I/O |
24 V DC (IEC 61131-2) |
| 900C72R-0100-43 |
Up to 4608 with remote I/O |
24 V DC (IEC 61131-2) |
| 900C72R-0100-44 |
Up to 4608 with remote I/O |
24 V DC (IEC 61131-2) |
| 900C72-0144-00 |
Up to 4608 with remote I/O |
24 V DC (IEC 61131-2) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 900C72R-0000-41 is the device-level element in a Honeywell PLC controller installation. It receives the field signals and control supply listed above — 24 V DC (IEC 61131-2) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in packaging machines, conveyor transfer cells, small process skids, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Honeywell 900C72R-0000-41
Honeywell 900C72R-0000-41 — PLC / CPU module used as the device-level control core in an automation panel, handling logic, timing and communication tasks. The figures below are taken from the specification table on this page for catalog number 900C72R-0000-41; confirm the installed unit's part number and revision so the replacement matches both electrically and mechanically.
- Total I/O: Up to 4608 with remote I/O — Confirm the revision of the installed unit before a like-for-like replacement.
- Certifications: CE, cULus — Use it as the reference when cross-checking a current-production equivalent.
- Enclosure rating: IP20 (IEC 60529) — Verify it in the project documentation before confirming the order.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Check this value against the nameplate of the installed unit before ordering.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about 900C72R-0000-41
Q.Which value is published under enclosure rating for catalog number 900C72R-0000-41?
For 900C72R-0000-41, enclosure rating is given as IP20 (IEC 60529). Use the value as the reference when sourcing a current-production equivalent.
Q.Before ordering 900C72R-0000-41, which total I/O entry should be checked?
The total I/O entry quoted above is Up to 4608 with remote I/O. Check the revision of the installed unit if the catalog number has been superseded.
Q.Where can I find the operating temperature data for 900C72R-0000-41?
It is listed in the specification table for Honeywell 900C72R-0000-41 as 0...+55 °C (IEC 60068-2-1). Compare it with the nameplate of the installed unit before ordering.
Q.How do I confirm compatibility of 900C72R-0000-41 before ordering?
Match the catalog number 900C72R-0000-41 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the 900C72R-0000-41 replace the unit currently installed in my panel?
Compare catalog number 900C72R-0000-41 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.