Couldn't load pickup availability
Got questions?
Feel free to get in touch
Ask an expert!
Honeywell · PLC controller
900C31-0011 is a Honeywell PLC controller with Total I/O Up to 4608 with remote I/O; Supply voltage 24 V DC (IEC 61131-2); Enclosure rating IP20 (IEC 60529). It is used in packaging machines, conveyor transfer cells, small process skids where the installed unit is matched to the original catalog number and a compact, documented part is required.
| Electrical | |
| Supply voltage | 24 V DC (IEC 61131-2) |
|---|---|
| I/O and communication | |
| Communication ports | 1 Ethernet port, 10/100 Mbps |
| Total I/O | Up to 4608 with remote I/O |
| Mechanical | |
| Dimensions (H x W x D) | 137 mm x 38.1 mm (5.4 in x 1.5 in) |
| Weight | 350 g |
| Mounting | 35 mm DIN rail (IEC 60715) |
| Enclosure rating | IP20 (IEC 60529) |
| Environment and compliance | |
| Operating temperature | 0...+55 °C (IEC 60068-2-1) |
| Certifications | CE, cULus |
Values follow the Honeywell PLC controller specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
| Honeywell PLC controller variants | |||
| Catalog number | Total I/O | Supply voltage | |
|---|---|---|---|
| 900C31-0011 (this page) | Up to 4608 with remote I/O | 24 V DC (IEC 61131-2) | |
| 900C31-0020 | Up to 4608 with remote I/O | 24 V DC (IEC 61131-2) | |
| 900C31-0021 | Up to 4608 with remote I/O | 24 V DC (IEC 61131-2) | |
| 900C31024400 | Up to 4608 with remote I/O | 24 V DC (IEC 61131-2) | |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
The 900C31-0011 is the device-level element in a Honeywell PLC controller installation. It receives the field signals and control supply listed above — 24 V DC (IEC 61131-2) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in packaging machines, conveyor transfer cells, small process skids, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Honeywell 900C31-0011 — PLC / CPU module used as the device-level control core in an automation panel, handling logic, timing and communication tasks. The figures below are taken from the specification table on this page for catalog number 900C31-0011; record the nameplate data of the unit being replaced before selecting an equivalent.
Available from stock with datasheet, certificates and a quotation on request.
Q.Before ordering 900C31-0011, which dimensions (H x W x D) entry should be checked?
The dimensions (H x W x D) entry quoted above is 137 mm x 38.1 mm (5.4 in x 1.5 in). Check the revision of the installed unit if the catalog number has been superseded.
Q.Where can I find the enclosure rating data for 900C31-0011?
It is listed in the specification table for Honeywell 900C31-0011 as IP20 (IEC 60529). Compare it with the nameplate of the installed unit before ordering.
Q.For 900C31-0011, what does the specification table state about mounting?
The specification table lists mounting = 35 mm DIN rail (IEC 60715) for Honeywell 900C31-0011. Confirm this figure against the unit currently in the panel.
Q.What should I include in an enquiry for 900C31-0011?
Send the full catalog number 900C31-0011, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Honeywell 900C31-0011.
Q.How do I confirm compatibility of 900C31-0011 before ordering?
Match the catalog number 900C31-0011 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.
Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. The Express surcharge is calculated at checkout based on destination and order weight.
Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.
Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date of delivery, against defects in materials and workmanship under normal use.
This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.
No reviews yet. Be the first to review this product!
