Honeywell · CPU Module
2MLI-CPUH-CC is a Honeywell controller with Total I/O 6,144; Supply voltage 24 V DC (IEC 61131-2); Enclosure rating IP20 (IEC 60529). It is used in packaging machines, conveyor transfer cells, small process skids where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Total I/O6,144
-
Supply voltage24 V DC (IEC 61131-2)
-
Enclosure ratingIP20 (IEC 60529)
-
Mounting35 mm DIN rail (IEC 60715)
Specifications
| Electrical |
| Supply voltage |
24 V DC (IEC 61131-2) |
| Rated speed |
0.028 us/step |
| I/O and communication |
| Total I/O |
6,144 |
| Mechanical |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, cULus |
Values follow the Honeywell CPU Module specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Honeywell CPU Module variants |
| Catalog number |
Total I/O |
Supply voltage |
|
2MLI-CPUH-CC (this page) |
6,144 |
24 V DC (IEC 61131-2) |
| 2MLI-CPUS-CC |
3,072 |
24 V DC (IEC 61131-2) |
| 2MLI-CPUU-CC |
6,144 |
24 V DC (IEC 61131-2) |
| DC3200-CONTROLLER |
— |
24 V DC (IEC 61131-2) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 2MLI-CPUH-CC is the device-level element in a Honeywell controller installation. It receives the field signals and control supply listed above — 24 V DC (IEC 61131-2) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in packaging machines, conveyor transfer cells, small process skids, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Honeywell 2MLI-CPUH-CC
Honeywell 2MLI-CPUH-CC — PLC / CPU module used as the device-level control core in an automation panel, handling logic, timing and communication tasks. The figures below are taken from the specification table on this page for catalog number 2MLI-CPUH-CC; always cross-check the catalog number and hardware revision on the nameplate before placing an order.
- Total I/O: 6,144 — Match it to the existing panel and upstream protection.
- Mounting: 35 mm DIN rail (IEC 60715) — Record it with the other nameplate data when sourcing a replacement.
- Supply voltage: 24 V DC (IEC 61131-2) — Confirm the revision of the installed unit before a like-for-like replacement.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Use it as the reference when cross-checking a current-production equivalent.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about 2MLI-CPUH-CC
Q.Before ordering 2MLI-CPUH-CC, which total I/O entry should be checked?
The total I/O entry quoted above is 6,144. Confirm this figure against the unit currently in the panel.
Q.Where can I find the operating temperature data for 2MLI-CPUH-CC?
It is listed in the specification table for Honeywell 2MLI-CPUH-CC as 0...+55 °C (IEC 60068-2-1). Use the value as the reference when sourcing a current-production equivalent.
Q.For 2MLI-CPUH-CC, what does the specification table state about enclosure rating?
The specification table lists enclosure rating = IP20 (IEC 60529) for Honeywell 2MLI-CPUH-CC. Check the revision of the installed unit if the catalog number has been superseded.
Q.How do I confirm compatibility of 2MLI-CPUH-CC before ordering?
Match the catalog number 2MLI-CPUH-CC and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the 2MLI-CPUH-CC replace the unit currently installed in my panel?
Compare catalog number 2MLI-CPUH-CC and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.