Honeywell · PLC controller
2MLB-E08A-CC is a Honeywell industrial component with Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1); Mounting DIN rail / panel. It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
-
CertificationsCE, cULus
Specifications
| Electrical |
| Rated impulse withstand Uimp |
+/-1500 V square wave |
| Mechanical |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Storage temperature |
-25 to +70 C |
| Certifications |
CE, cULus |
| Humidity |
5 to 95% RH non-condensing |
Values follow the Honeywell PLC controller specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Honeywell PLC controller variants |
| Catalog number |
Mounting |
|
2MLB-E08A-CC (this page) |
DIN rail / panel |
| 2MLB-E04A-CC |
DIN rail / panel |
| 2MLB-E06A-CC |
DIN rail / panel |
| 900C30-0360-00 |
35 mm DIN rail (IEC 60715) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 2MLB-E08A-CC is the device-level element in a Honeywell industrial component installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Honeywell 2MLB-E08A-CC
Honeywell 2MLB-E08A-CC — PLC / CPU module used as the device-level control core in an automation panel, handling logic, timing and communication tasks. The figures below are taken from the specification table on this page for catalog number 2MLB-E08A-CC; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Certifications: CE, cULus — Use it as the reference when cross-checking a current-production equivalent.
- Humidity: 5 to 95% RH non-condensing — Verify it in the project documentation before confirming the order.
- Rated impulse withstand Uimp: +/-1500 V square wave — Check this value against the nameplate of the installed unit before ordering.
- Mounting: DIN rail / panel — Match it to the existing panel and upstream protection.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about 2MLB-E08A-CC
Q.Where can I find the storage temperature data for 2MLB-E08A-CC?
It is listed in the specification table for Honeywell 2MLB-E08A-CC as -25 to +70 C. Confirm this figure against the unit currently in the panel.
Q.For 2MLB-E08A-CC, what does the specification table state about humidity?
The specification table lists humidity = 5 to 95% RH non-condensing for Honeywell 2MLB-E08A-CC. Use the value as the reference when sourcing a current-production equivalent.
Q.Which value is published under rated impulse withstand Uimp for catalog number 2MLB-E08A-CC?
For 2MLB-E08A-CC, rated impulse withstand Uimp is given as +/-1500 V square wave. Check the revision of the installed unit if the catalog number has been superseded.
Q.What should I include in an enquiry for 2MLB-E08A-CC?
Send the full catalog number 2MLB-E08A-CC, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Honeywell 2MLB-E08A-CC.
Q.How do I confirm compatibility of 2MLB-E08A-CC before ordering?
Match the catalog number 2MLB-E08A-CC and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.