Schneider Electric · PLC Connector / Cable
ETXPC412M2M4020 is a Schneider Electric industrial component with Rated current Ie up to 4 A; Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| Mechanical |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, CSA, CCC, EAC, Marine |
Values follow the Schneider Electric PLC Connector / Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Schneider Electric PLC Connector / Cable variants |
| Catalog number |
Rated current Ie |
Mounting |
|
ETXPC412M2M4020 (this page) |
up to 4 A |
DIN rail / panel |
| ETXPC412M2M4006 |
up to 4 A |
DIN rail / panel |
| ETXPC412M1M3010 |
up to 4 A |
DIN rail / panel |
| ETXPC411M400040 |
up to 4 A |
DIN rail / panel |
Verify model-specific dimensions, terminals and installation requirements in the manufacturer documentation before selecting an alternative.
Where it sits in the control system
The ETXPC412M2M4020 is the device-level element in a Schneider Electric industrial component installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Schneider Electric ETXPC412M2M4020
Schneider Electric ETXPC412M2M4020 Industrial Cable. See the manufacturer product information for this catalog number.
- Certifications: CE, UL, CSA, CCC, EAC, Marine — Check this value against the nameplate of the installed unit before ordering.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Match it to the existing panel and upstream protection.
- Mounting: DIN rail / panel — Record it with the other nameplate data when sourcing a replacement.
- Enclosure rating: IP20 (IEC 60529) — Confirm the revision of the installed unit before a like-for-like replacement.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about ETXPC412M2M4020
Q.For ETXPC412M2M4020, what does the specification table state about certifications?
The specification table lists certifications = CE, UL, CSA, CCC, EAC, Marine for Schneider Electric ETXPC412M2M4020. Compare it with the nameplate of the installed unit before ordering.
Q.Which value is published under rated current Ie for catalog number ETXPC412M2M4020?
For ETXPC412M2M4020, rated current Ie is given as up to 4 A. Confirm this figure against the unit currently in the panel.
Q.Before ordering ETXPC412M2M4020, which mounting entry should be checked?
The mounting entry quoted above is DIN rail / panel. Use the value as the reference when sourcing a current-production equivalent.
Q.How do I confirm compatibility of ETXPC412M2M4020 before ordering?
Match the catalog number ETXPC412M2M4020 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the ETXPC412M2M4020 replace the unit currently installed in my panel?
Compare catalog number ETXPC412M2M4020 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.