IFM · connection cable
E11855 is an IFM connection cable with Rated current Ie up to 4 A; Enclosure rating IP67 (IEC 60529); Operating temperature -25...+80 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Enclosure ratingIP67 (IEC 60529)
-
Operating temperature-25...+80 °C (IEC 60068-2-1)
-
CertificationsCE, cULus
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| Mechanical |
| Dimensions (H x W x D) |
15 x 15 x 43 |
| Weight |
677 |
| Enclosure rating |
IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+80 °C (IEC 60068-2-1) |
| Certifications |
CE, cULus |
| Degree of protection |
III |
Values follow the IFM connection cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| IFM connection cable variants |
| Catalog number |
Rated current Ie |
|
E11855 (this page) |
up to 4 A |
| E11858 |
up to 4 A |
| E11898 |
up to 4 A |
| E11020 |
up to 4 A |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The E11855 is the device-level element in an IFM connection cable installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides standard panel or DIN-rail support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for IFM E11855
IFM E11855 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number E11855; confirm the installed unit's part number and revision so the replacement matches both electrically and mechanically.
- Rated current Ie: up to 4 A — Match it to the existing panel and upstream protection.
- Degree of protection: III — Record it with the other nameplate data when sourcing a replacement.
- Operating temperature: -25...+80 °C (IEC 60068-2-1) — Confirm the revision of the installed unit before a like-for-like replacement.
- Dimensions (H x W x D): 15 x 15 x 43 — Use it as the reference when cross-checking a current-production equivalent.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about E11855
Q.For E11855, what does the specification table state about rated current Ie?
The specification table lists rated current Ie = up to 4 A for IFM E11855. Compare it with the nameplate of the installed unit before ordering.
Q.Which value is published under operating temperature for catalog number E11855?
For E11855, operating temperature is given as -25...+80 °C (IEC 60068-2-1). Confirm this figure against the unit currently in the panel.
Q.Before ordering E11855, which dimensions (H x W x D) entry should be checked?
The dimensions (H x W x D) entry quoted above is 15 x 15 x 43. Use the value as the reference when sourcing a current-production equivalent.
Q.Can the E11855 replace the unit currently installed in my panel?
Compare catalog number E11855 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.What should I include in an enquiry for E11855?
Send the full catalog number E11855, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for IFM E11855.