IFM · connection cable
E11743 is an IFM connection cable with Rated current Ie up to 4 A; Enclosure rating IP67 (IEC 60529); Operating temperature -25...+80 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Enclosure ratingIP67 (IEC 60529)
-
Operating temperature-25...+80 °C (IEC 60068-2-1)
-
CertificationsCE, cULus
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| Mechanical |
| Dimensions (H x W x D) |
26 x 26 x 85 |
| Weight |
2197 |
| Enclosure rating |
IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+80 °C (IEC 60068-2-1) |
| Certifications |
CE, cULus |
Values follow the IFM connection cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| IFM connection cable variants |
| Catalog number |
Rated current Ie |
|
E11743 (this page) |
up to 4 A |
| E11741 |
up to 4 A |
| E11745 |
up to 4 A |
| E11746 |
up to 4 A |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The E11743 is the device-level element in an IFM connection cable installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides standard panel or DIN-rail support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for IFM E11743
IFM E11743 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number E11743; confirm the installed unit's part number and revision so the replacement matches both electrically and mechanically.
- Operating temperature: -25...+80 °C (IEC 60068-2-1) — Match it to the existing panel and upstream protection.
- Certifications: CE, cULus — Record it with the other nameplate data when sourcing a replacement.
- Enclosure rating: IP67 (IEC 60529) — Confirm the revision of the installed unit before a like-for-like replacement.
- Dimensions (H x W x D): 26 x 26 x 85 — Use it as the reference when cross-checking a current-production equivalent.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about E11743
Q.For E11743, what does the specification table state about certifications?
The specification table lists certifications = CE, cULus for IFM E11743. Check the revision of the installed unit if the catalog number has been superseded.
Q.Which value is published under dimensions (H x W x D) for catalog number E11743?
For E11743, dimensions (H x W x D) is given as 26 x 26 x 85. Compare it with the nameplate of the installed unit before ordering.
Q.Before ordering E11743, which weight entry should be checked?
The weight entry quoted above is 2197. Confirm this figure against the unit currently in the panel.
Q.How do I confirm compatibility of E11743 before ordering?
Match the catalog number E11743 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.What should I include in an enquiry for E11743?
Send the full catalog number E11743, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for IFM E11743.