IFM · connection cable
E11227 is an IFM connection cable with Rated current Ie up to 4 A; Enclosure rating IP67 (IEC 60529); Operating temperature -25...+80 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Enclosure ratingIP67 (IEC 60529)
-
Operating temperature-25...+80 °C (IEC 60068-2-1)
-
CertificationsCE, cULus
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| Mechanical |
| Dimensions (H x W x D) |
45 x 20 x 47 |
| Weight |
1107.5 |
| Enclosure rating |
IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+80 °C (IEC 60068-2-1) |
| Certifications |
CE, cULus |
Values follow the IFM connection cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| IFM connection cable variants |
| Catalog number |
Mounting |
Rated current Ie |
|
E11227 (this page) |
— |
up to 4 A |
| E11214 |
Backplane mounting |
up to 4 A |
| E11215 |
Backplane mounting |
up to 4 A |
| E11230 |
DIN rail / panel |
up to 4 A |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The E11227 is the device-level element in an IFM connection cable installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides standard panel or DIN-rail support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for IFM E11227
IFM E11227 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number E11227; record the nameplate data of the unit being replaced before selecting an equivalent.
- Certifications: CE, cULus — Confirm the revision of the installed unit before a like-for-like replacement.
- Enclosure rating: IP67 (IEC 60529) — Use it as the reference when cross-checking a current-production equivalent.
- Rated current Ie: up to 4 A — Verify it in the project documentation before confirming the order.
- Dimensions (H x W x D): 45 x 20 x 47 — Check this value against the nameplate of the installed unit before ordering.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about E11227
Q.For E11227, what does the specification table state about dimensions (H x W x D)?
The specification table lists dimensions (H x W x D) = 45 x 20 x 47 for IFM E11227. Confirm this figure against the unit currently in the panel.
Q.Which value is published under certifications for catalog number E11227?
For E11227, certifications is given as CE, cULus. Use the value as the reference when sourcing a current-production equivalent.
Q.Before ordering E11227, which rated current Ie entry should be checked?
The rated current Ie entry quoted above is up to 4 A. Check the revision of the installed unit if the catalog number has been superseded.
Q.Can the E11227 replace the unit currently installed in my panel?
Compare catalog number E11227 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.What should I include in an enquiry for E11227?
Send the full catalog number E11227, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for IFM E11227.